Radio Communications - Recent Questions, Troubleshooting & Support


Brass key? It is a telecommunications set. Is your firmware up to date

FT-2000D - Yaesu.com


yaesu.com > downloadFile > pdfthis manual in its entirety, and keep it handy for reference as you explore the many capabilities of your new transceiver. Before using your FT-2000D, be sure to ...

Yaesu FT-2000 Amateur Transceiver. Yaesu FT2000


https://www.universal-radio.com > catalog > hamhf

The Yaesu FT-2000 follows in the tradition of venerable FT-1000 series, and incorporates an amazing number of advanced features from the FT-9000 series.

Reviews For: Yaesu FT-2000/2000D - eHam.net


https://www.eham.net > reviews > detail

My FT2000 has the last Yaesu´s updated firmware and also the AC0C roofing filter installed in. The FT2000 with those changes seems another class of radio.

Yaesu Radio... | Answered on Dec 04, 2019


The book list the wall adapter to charger NTN1171 as being part number 2580162R01. The description says 13.8VDC 1.5A AC ADAPTER. When googling the part number, it appears someone is selling one on eBay for around $29.99. Retail from Motorola appears to be $125.

Motorola HT1000,... | Answered on Dec 03, 2019


Motorola EM1000 tengo unos radios y sucede que cuando voy a hablar se me apaga si alguien me puede ayudar muchas gracias mi whatsapp +57 3006779411

Motorola EM1000R... | Answered on Nov 24, 2019


Scanner Reset: To initialize the scanner's memory, turn off the scanner. Then press 2, 9, and Hold while turning it on. Important! This deletes all preprogrammed data. You cannot restore preprogrammed data that has been deleted.

Uniden... | Answered on Nov 22, 2019


Have you got the switch in correct position beneath the batteries ?

Uniden... | Answered on Nov 22, 2019


ya sure using the codes you can solve this sim lock problem for your samsung mobile because its safe for your mobile......
Get the unlock code for your samsung corby model mobile from this site Onlinegsmunlock.com , here it gives the easy methods to get the mobile unlocked.........

Samsung S3650... | Answered on Nov 20, 2019


Bluetooth is a short-range (33 feet/10 meters) wireless technology that allows two Bluetooth-enabled devices to connect wirelessly and communicate between them. If your son's Samsung MX-H620 HIFI is not Bluetooth-enabled, the two devices will not be able to connect in any way. If the headset were corded (it is not because it is Bluetooth) you could plug its cord into the headphone (LINE/AUX IN) jack on the Samsung. if the Samsung system is not Bluetooth, the only option is to find a suitable Bluetooth adapter to make it Bluetooth-enabled. However, you can use the Sony headset to listen to music or make phone calls from Bluetooth-enabled devices that you own such as phone, tablet, iPod, iPad.

Samsung Radio... | Answered on Nov 18, 2019


First, clean all the connectors associated with this board. Over time they can get corrosion built up on them and they stop conducting. Use De-OXIT or Isopropyl alcohol to clean them. You may have to clean the deviation control on the board or replace C* and C10. I doubt if the microphone amplifier, Q1, is bad but if you can check the voltages around it, that might give you a clue. This problem shouldn't be too hard to fix as the rest of the radio is working. Good Luck!
a2y9jgk34igeaaaaaelftksuqmcc

Kenwood Radio... | Answered on Nov 13, 2019


Took me 6.5 seconds to find. https://www.manualslib.com/manual/908400/Kenwood-Tk-705.html Really, are you even trying?

Kenwood Radio... | Answered on Nov 12, 2019


you need just to keep pressed the Call key on HS during the activation of Bluetooth in your mobile set.. searching together will work..

Samsung WEP750... | Answered on Nov 11, 2019


You can connect it to the MIC input through a 10K resistor. That's the easy way. https://www.mods.dk/manual.php?brand=kenwood has a better method. Go to this website and look for the TR-9130 area and you'll find several files.

Kenwood Radio... | Answered on Nov 10, 2019


White is usually the audio wire. Black is ground and red PTT. The shield goes to the mic ground connection. The pinout is in your TS-440 manual.

Kenwood Radio... | Answered on Nov 10, 2019


It is very likely that you haven't got the same CTCSS or DCS codes matched. Try turning them off on both radios.

Cobra Radio... | Answered on Nov 10, 2019

Not finding what you are looking for?
Radio Communications Logo

46,839 questions posted

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Anthony Ward
Anthony Ward

Level 2 Expert

397 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...