...pitch chain require a 3/16-inch or 4.5-mm file. Check your chain-saw owner's manual or saw-chain instruction sheet to determine the correct file diameter. If you're not sure, ask your dealer. He also ...
diameter trees and just want to cut faster you can get a more aggressive chain but use caution as you should be VERY experienced as the chain has the ability to pull you right into the work if you are
Question about , No.455 Rancher, 20" Gas - Powered Chainsaw
...chain r bar moves prematuely and chain comes off bar nuts r tight have you made sure that chain pitch and gauge are the same as the sprocket pitch pitches can be 3/8 lo pro 0.50 gauge .325 x 0.50 ...
...This is a 20 inch chain. A 20" bar unfortunately does not narrow it down. Fortunately both the .325 pitch chain and the 3/8 pitch chain sharpen at 25 degrees and you should have one of these chains. ...
Question about "Chain Saw - 16" Bar, 3 Hp
...Can you provide The saw is a 41, as standard it ran a 15" bar and chain, in the UK it ran a .325 pitch, however in the US, it ran a 3/8 pitch chain, as you should change the sprocket if fitting a ...
...bar and chain for a 359 chainsaw husky Depends on what lenght you want, as standard it runs a .325 pitch, 058 gauge chain, bar lenghts are available in 13,15,18,20", you can convert them to a 3/8 ...
why doe my sprocket on Husqvarna 455 keep tearing up the drive part of he chain Are you sure the pitch of the chain is the same as the sprocket, ie if you are running a 3/8 pitch chain you need a 3/8 ...
...chain, where it no longer slides through the bar? You may possibly be using the wrong chain. The pitch on the chain has to match the pitch on the sprocket. Also check that the slide slot in the
Question about 20" 60cc Rancher Chain Saw 460
what causes my 460 chain saw to tear up the teeth on the chain in the clutch wrong pitch of chain for that saw . sometimes folks bring me a saw that they have no idea what the correct pitch chain is ...
Question about 20" 60cc Rancher Chain Saw 460
What's the chain gauge and pitch for a husqvarna 455 rancher Husqvarna 455 Rancher 20" Bar, 3/8" Pitch, .050" Gauge
Usually answered in minutes!
529 Questions
514 Questions
473 Questions
353 Questions
122 Questions