...paper up around the output roller and will not release ANY pages. It just rolls them up and locks up. Piece of JUNK! Try bending the edge of the paper (work with the natural bow of the paper) so the ...
...paper cannot exit output tray frankzjm has asked you to clarify your question to best assist with your Paper jams after printing and will not exit top output tray problem: follow your answer, is the ...
Question about ML-2510 Laser Printer
paper come through the top output tray. It gets jammed up like a fan after it has been printed. It is like there is something blocking the paper from completing its cycle to come out. I have taken the
Question about CLX-3175FN Color Laser All-in-One Printer
output tray? If it is, where only about 1/3 of the paper will comeout and stop printing, the 2nd paper sensor right about that area is defective. If you're unit is still under warranty, a service call
Question about SCX 4521F All-In-One Laser Printer
...Pull the paper tray out and clean the rubber roller. 1 problem in my printer when i copied or scanned any picture or document it give output black line or black ground of paper. what is it solution
showing message as out bin is full The output tray of the machine is full of paper. Solution is to Remove paper.
Question about CLP-315W Laser Color Printer
...paper)and output tray(top part where paper comes out) is missing error (sensor is prob bad) i hope this helps Media is paper, so a jam means the printer is detecting a paper jam. Open the front door ...
Question about CLX-3300 Multifunctional Laser Colour Printer SAMSUNG
output bin full remove paper open the tray where paper come out all the way and there is a switch on right hand needs to be reset
Question about CLX-3300 Multifunctional Laser Colour Printer SAMSUNG
output tray or paper bin is full and needs to be emptied. When the output tray is full, the printer will stop printing until you clear the paper from the output area. Here's what you can do to resolve
Question about CLX-3300 Multifunctional Laser Colour Printer SAMSUNG
...paper in the output tray. Check for a paper jam at the output. Look for anything blocking the sensor on the left side (or center) of the output tray. This sensor is a little plastic flag that should ...
Usually answered in minutes!
1,017 Questions
951 Questions
482 Questions
475 Questions
417 Questions