Ricoh Aficio 2035e showing "Open Cover" message.

open and close all covers including the one on the lower right side

kindly check the cover that the machine is showing and close properly

open the front door
look just above the fusing unit and you will find a roundlike unit there that is where the sensor is located.

error code 322 on a Ricoh/Gestener/Nashua/Aficio is usualy related to the laser unit/Polygon mirror motor, can you hear the motor starting up when you swith on the printer?it shoul sound something like an jet engine starting up, if you do not hear it then ask your local technician to replace the polygon mirror motor.

Hello!
Make sure that all off the covers and doors are properly closed.
If you are sure that everything is closed you probably have a faulty switch or a broken gate in the bottom tray.
See you!

It sounds as if it is not picking up the paper from the tray. It might need new feed rollers. Another thing to check is the lift arms on both sides of the tray. Make sure the springs are still attached to them. There is also a little switch on the left side front of the tray that adjusts the bottom plate pressure. You can try adjusting that to see if it helps.

It very easy...:) if you have a drum in hand.
Open the front cover. Lift one big green handle. Untainted 2 big black screws and open the drum cover. There you will see four groups of drum+development unit. Pull out the needed drum and pull in the new one. Then close all covers and that's all
pifonski

Hi there !

You have to open the front cover means that you have to oper the toner compartment and check for the paper jammed inside.

Did it helps your or you find the paper jammed.

is it a miss feed problem? open the cover on the right cover of the machine then remove the jammed paper. then close the covers

some times the nipple (cover) of the toner stays in the toner holder this wont allow the new one to be opened