Clearing memory on fax

Once you print out the fax log it should clear the memory. Here are the instructions for printing the log.


To print the fax log from the device control panel
1. On the device control panel, press Setup.
2. Press the arrow key to move down to Print Report, and then press OK.
3. Press the arrow key to move down to Fax Log, and then press OK.
4. Press OK again to print the log

Just turn the power off for 10 seconds and then back on. It should have cleared the stored faxes but not the settings.

Try clearing the DRAM( Document memory.) Do the following.....
Press PROGRAM, *, G...(display should say "DRAM Clear".)
Press ENTER.
That should do it.

Try clearing the DRAM. ( Document memory.) Do the following....
Press PROGRAM, *, G ..( Display should say DRAM Clear.)
Press ENTER.
That should do it.

Like every fax machine, there is a limit to how many pages it can keep in memory before needing to be cleared. Yours is apparently only 99. If you want to send more than 99 pages at a time without clearing the memory, i'd look for another printer.

Most of the time putting paper in the machine will allow it to continue printing anything that is in the memory. Other functions such as recall etc etc are not available on these low end models. For example this model does not have a harddrive. Usually a bad fax situation like this will lock the machine up. This forces a clearing out of the memory to bring the machine back to life.

Sorry, but this is by design.

Press quickly......MENU 2864 then press 91

I had the same "Full Memory" problem & called Sharp. You need to unplug the fax, then hold (press down) on both the "Start/Memory" & the "Stop" buttons at the same time. While holding them down, plug the fax back in. After it's plugged in, you may need to press the start button again. That should clear it.

here is the manual



http://www.retrevo.com/s/Panasonic-KX-FL541-review-manual/id/2914ag514/t/1-2/

TYPICALLY A FAX MACHINE WILL RECEIVE MESSAGE IN MEMORY WHEN NO PAPER OR TONER/INK FINISHED INDICATION IS THERE, REPLENISH THESE SUPPLIES WITH GENUINE ONES AND FAX WILL START PRINTING. IF PROBLEM IS NOT SOLVED , PLEASE TRY TO CLEAR THE SETTING FOR MEMORY RECEIVING, IF STILL NOT SOLVED TRY BRINGING THE MACHINBE TO FACTROY SET SETTING BY CLEARING THE MEMORY. HAPPY FAXING OMNIPRESENT