Printing unacceptable Print on page has vertical streaks of non printing. So letters & numbers are not complete.

Sadly, the following HP support page offers about 8 dirrerent possible solutions, some of which you may have tried. You likely will have to try the others to see if they eliminate the problem.

Myself, I would download the HP Print and Scan Doctor just to see if it worked any magic or offered advice. Alternatively, Here is the support page related to printing issues with this printer: https://support.hp.com/us-en/document/c00599279

https://h30434.www3.hp.com/t5/LaserJet-Printing/A-Vertical-Strip-and-repeated-signs-on-Print-Outs/td-p/5668042

https://www.tonergiant.co.uk/blog/2017/05/black-lines-down-the-page-4-causes-and-how-to-fix/

Print Head Alignment For Canon printer For more details visit this website: https://www.errorsdoc.com/canon/

Open the printer driver setup window.
Click Custom Settings on the Maintenance tab.
The Custom Settings dialog box opens.
Switch head alignment to manual.
Check the Align heads manually check box.
Apply the settings.
Click OK and when the confirmation message appears, click OK.
Click Print Head Alignment on the Maintenance tab.
The Start Print Head Alignment dialog box opens.
Load paper in the machine.
Load three sheets of A4 size or Letter size plain paper into the rear tray.
Execute head alignment.
Make sure that the machine is on and click Align Print Head.
Follow the instruction in the message.
Check the printed pattern.
Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click OK.
Note:
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal streaks.
(A) Least noticeable horizontal streaks
(B) Most noticeable horizontal streaks
Confirm the displayed message and click OK.
The second pattern is printed.
Check the printed pattern.
Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
Even if the patterns with the least amount of streaks are clicked in the preview window, their numbers are automatically entered in the associated boxes.
When you have entered all the necessary values, click OK.
Note:
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks.
(A) Least noticeable vertical streaks
(B) Most noticeable vertical streaks
Confirm the displayed message and click OK.
The third pattern is printed.
Check the printed pattern.
Enter the numbers of the patterns with the least noticeable horizontal stripes in the associated boxes.
Even if the patterns with the least noticeable horizontal stripes are clicked in the preview window, their numbers are automatically entered in the associated boxes.

Issue: How do I align the print head?
Solution: Perform a Print Head Alignment (Windows)- MX340

Aligning the Print Head Position Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. The procedure for performing print head alignment is as follows:

Print Head Alignment

1. Open the printer driver setup window
   • In Windows Vista, select the Start menu -> Control Panel -> Hardware and Sound -> Printers.
     
     
   • In Windows XP, select the Start menu -> Control Panel -> Printers and Other Hardware -> Printers and Faxes.
     
     
   • In Windows 2000, select the Start menu -> Settings -> Printers.
     
     
     
2. Right-click your model name icon, and then select Printing Preferences from the displayed menu.
   
   The printer driver setup window appears.
   
   
3. Click Custom Settings on the Maintenance tab.
   The Custom Settings dialog box opens.
   
   
4. Check the Align heads manually check box.
   
   
5. Click Send, and click OK when the confirmation message appears.
   
   
6. Click Print Head Alignment on the Maintenance tab The Start Print Head Alignment dialog box opens.
   
   
   
   
7. Load three sheets of A4 size or Letter size plain paper into the rear tray (3).
   
   
   
   
8. Execute head alignment Make sure that the machine is on and click Align Print Head.
   Follow the instruction in the message.
   
   
9. Check the printed pattern
   Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
   Clicking the patterns with the least amount of streaks in the preview window, will automatically set their numbers in the associated boxes.
   
   
   
   
10. When you have entered all the necessary values, click OK.
    
    Note:
    • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks.
      
      
      (A) Less noticeable vertical white streaks
      (B) More noticeable vertical white streaks
      
      
    • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal white streaks.
      
      
      (A) Less noticeable horizontal white streaks
      (B) More noticeable horizontal white streaks
      
      
11. Confirm the displayed message and click OK.
    The second pattern is printed.
    Important: Do not open the Scanning Unit (Cover) while printing is in progress.
    
    
12. Check the printed pattern
    Enter the numbers of the patterns with the least amount of streaks in the associated boxes.
    Clicking the patterns with the least amount of streaks in the preview window, will automatically set their numbers in the associated boxes.
    
    
    
    
13. When you have entered all the necessary values, click OK.
    
    Note:
    
    • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white streaks.
      
      
      (A) Less noticeable vertical white streaks
      (B) More noticeable vertical white streaks
      
      
      
14. Confirm the displayed message and click OK.
    The third pattern is printed.
    Important: Do not open the Scanning Unit (Cover) while printing is in progress.
    
    
15. Check the printed pattern
    Enter the numbers of the patterns with the least noticeable horizontal stripes in the associated boxes.
    Clicking the patterns with the least noticeable horizontal stripes in the preview window, will automatically set their numbers in the associated boxes.
    
    
    
    
16. When you have entered all the necessary values, click OK.
    
    Note:
    
    • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal white stripes.
      
      
      (A) Less noticeable horizontal white stripes
      (B) More noticeable horizontal white stripes
      

Note: To print and check the current setting, open the Start Print Head Alignment dialog box, and click Print Alignment Value.

The instructions as copied from the Pixma 480 "onscreen manual." (Only the text -- not the images -- could be pasted into the solution. Hope you can follow the text.) Steve G.

Prepare 2 sheets of A4 or Letter-sized plain paper

1. Make sure that the power is turned on, and load 2 sheets of A4 or Letter-sized plain paper in the Rear Tray.

2. Open the Paper Output Tray gently, and open the Output Tray Extension.

3. Print the print head alignment pattern.
- Press the Menu button.
- Select Maintenance, and press the OK button.
- Select Print head alignment, and press the OK button.
Note: To print the current head position adjustment values, select Head alignment print in the Maintenance menu and press the OK button. See Selecting Menus on the Top Menu Screen.)
- Select Yes, and press the OK button to print alignment sheet.
- Check the pattern is printed correctly, select Yes and press OK button.
- Confirm the displayed message and press the OK button.

The Print head alignment screen appears.

4. Adjust the print head position.
- Check the printed patterns, and use the (Left) or (Right) button to select the number of the pattern that has the least noticeable streaks for column A.
Note: If it is difficult to select the best pattern, select the pattern that has the least noticeable white streaks.
(A) Less noticeable vertical white streaks
(B) Noticeable vertical white streaks
(C) Less noticeable horizontal white streaks
(D) Noticeable horizontal white streaks
- Repeat the same procedure to input the pattern number for each column from B to L, then press the OK button.
- Select Yes to continue printing, and press the OK button.
- The second page of print head alignment sheet will be printed.
- Confirm the message for print head alignment, and press the OK button.
- Check the printed patterns and use the (Left) or (Right) button to input the number of the pattern that has the least noticeable horizontal streaks for column M.
- Repeat the same procedure to input the pattern number for each column from N to R, and press the OK button.

Issue: Banded or streaked prints
Solution: Change the Print Quality Settings (Windows)

Change the Print Quality Settings (Windows) The Quality setting controls how finely ink droplets are placed on the printed page. Depending on the type of paper being used a higher Print Quality setting does not always insure a better print. Print speed will decrease as the Print Quality setting is increased. Follow the instructions below to change the print quality settings in the Canon printer driver for the Windows operating system through a printing application.

1. Click 'Properties' in the Print dialog box.
   
   Note: Depending on the Application software, 'Properties' may be displayed as 'Preferences'.
   
   
2. Set the desired print quality in the 'Print Quality' section.
   
   
3. Select 'High', 'Standard', or 'Draft / Fast'.
   

To set more detailed print quality settings, follow this procedure:

1. Select 'Custom' and click 'Set'.
   
   
   
   
2. In the Set Print Quality dialog drag the slide bar from 'Fast' to 'Fine' to select the print quality.
   
   
   
   Note: There are five options in 'Quality'. However, selectable options are limited depending on the media type.
   
   
3. Select 'Auto', 'Dither', or 'Diffusion' from the 'Halftoning' section.

Here's the solution from Canon USA:

Issue: Banded or streaked prints
Solution: Print Head Alignment MP530

Perform Print Head Alignment Instructions to perform a Print Head Alignment directly from the machine. If diagrams or ruled lines are misaligned, print head alignment is required. The print head alignment can be performed automatically or manually. If the automatic print head alignment does not work, adjust the print head manually. Automatic Print Head Alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load a few sheets of letter-sized plain paper in the auto sheet feeder.
   
   
3. Press the Open button to open the Paper Output Tray. Then open up and set the extension by pressing down the hollow on the front side.
   
   
4. Execute automatic print head alignment.
   
5. 1. Press <COPY> button.
      
   2. Press <Menu> repeatedly to select [MAINTENACE].
      
   3. Press the left or right cursor to select [AUTO HEAD ALIGN], then press the <OK>. (A pattern is printed and the print head is automatically aligned. It takes about five minutes to finish printing the pattern.)
      
      
      
      

Manual print head alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load two sheets of Letter-sized plain paper in the auto sheet feeder or cassette.
   
   
3. Ensure that the proper paper source is selected.
   
   
4. Execute manual print head alignment.
   
5. 1. Press <Menu> repeatedly to select [MAINTENACE].
      
   2. Press the left or right cursor to select [ALIGN PRINT HEAD], then press the <OK>. (The nozzle check pattern is printed.)
      
      
6. Check the printed patterns and use the left or right arrow to input the number of the pattern in column A that has the least noticeable streaks.
   
   
   
   
7. Press <OK> to move the cursor to column B, and then use the left or right arrow to input the number of the pattern that has the least noticeable streaks.
   
   
8. Repeat the procedure until you finish inputting the pattern number for column P.
   
   
   
   
9. When you have finished inputting all pattern numbers, press <OK>.
   
   Note: For columns A through N select the patterns with the least visible vertical streaks. For columns O and P select the patterns with the fewest visible horizontal streaks.
   
   
   
   <1> Example of the pattern with the fewest visible vertical streak
   
   <2> Example of the pattern with the most visible vertical streak
   
   
   
   <1> Example of the pattern with the fewest visible horizontal streak
   
   <2> Example of the pattern with the most visible horizontal streak
   

Hope this helps - fotobean

Here's a solution from Canon USA:

Issue: Banded or streaked prints
Solution: Print Head Alignment MP530

Perform Print Head Alignment Instructions to perform a Print Head Alignment directly from the machine. If diagrams or ruled lines are misaligned, print head alignment is required. The print head alignment can be performed automatically or manually. If the automatic print head alignment does not work, adjust the print head manually. Automatic Print Head Alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load a few sheets of letter-sized plain paper in the auto sheet feeder.
   
   
3. Press the Open button to open the Paper Output Tray. Then open up and set the extension by pressing down the hollow on the front side.
   
   
4. Execute automatic print head alignment.
   
5. 1. Press <COPY> button.
      
   2. Press <Menu> repeatedly to select [MAINTENACE].
      
   3. Press the left or right cursor to select [AUTO HEAD ALIGN], then press the <OK>. (A pattern is printed and the print head is automatically aligned. It takes about five minutes to finish printing the pattern.)
      
      
      
      

Manual print head alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load two sheets of Letter-sized plain paper in the auto sheet feeder or cassette.
   
   
3. Ensure that the proper paper source is selected.
   
   
4. Execute manual print head alignment.
   
5. 1. Press <Menu> repeatedly to select [MAINTENACE].
      
   2. Press the left or right cursor to select [ALIGN PRINT HEAD], then press the <OK>. (The nozzle check pattern is printed.)
      
      
6. Check the printed patterns and use the left or right arrow to input the number of the pattern in column A that has the least noticeable streaks.
   
   
   
   
7. Press <OK> to move the cursor to column B, and then use the left or right arrow to input the number of the pattern that has the least noticeable streaks.
   
   
8. Repeat the procedure until you finish inputting the pattern number for column P.
   
   
   
   
9. When you have finished inputting all pattern numbers, press <OK>.
   
   Note: For columns A through N select the patterns with the least visible vertical streaks. For columns O and P select the patterns with the fewest visible horizontal streaks.
   
   
   
   <1> Example of the pattern with the fewest visible vertical streak
   
   <2> Example of the pattern with the most visible vertical streak
   
   
   
   <1> Example of the pattern with the fewest visible horizontal streak
   
   <2> Example of the pattern with the most visible horizontal streak
   

Hope this helps - fotobean.

Perform Print Head Alignment Instructions to perform a Print Head Alignment directly from the machine. If diagrams or ruled lines are misaligned, print head alignment is required. The print head alignment can be performed automatically or manually. If the automatic print head alignment does not work, adjust the print head manually. Automatic Print Head Alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load a few sheets of letter-sized plain paper in the auto sheet feeder.
   
   
3. Press the Open button to open the Paper Output Tray. Then open up and set the extension by pressing down the hollow on the front side.
   
   
4. Execute automatic print head alignment.
   
5. 1. Press <COPY> button.
      
   2. Press <Menu> repeatedly to select [MAINTENACE].
      
   3. Press the left or right cursor to select [AUTO HEAD ALIGN], then press the <OK>. (A pattern is printed and the print head is automatically aligned. It takes about five minutes to finish printing the pattern.)
      
      
      
      

Manual print head alignment

1. Press <ON/OFF> to turn on the machine.
   
   
2. Load two sheets of Letter-sized plain paper in the auto sheet feeder or cassette.
   
   
3. Ensure that the proper paper source is selected.
   
   
4. Execute manual print head alignment.
   
5. 1. Press <Menu> repeatedly to select [MAINTENACE].
      
   2. Press the left or right cursor to select [ALIGN PRINT HEAD], then press the <OK>. (The nozzle check pattern is printed.)
      
      
6. Check the printed patterns and use the left or right arrow to input the number of the pattern in column A that has the least noticeable streaks.
   
   
   
   
7. Press <OK> to move the cursor to column B, and then use the left or right arrow to input the number of the pattern that has the least noticeable streaks.
   
   
8. Repeat the procedure until you finish inputting the pattern number for column P.
   
   
   
   
9. When you have finished inputting all pattern numbers, press <OK>.
   
   Note: For columns A through N select the patterns with the least visible vertical streaks. For columns O and P select the patterns with the fewest visible horizontal streaks.
   
   
   
   <1> Example of the pattern with the fewest visible vertical streak
   
   <2> Example of the pattern with the most visible vertical streak
   
   
   
   <1> Example of the pattern with the fewest visible horizontal streak
   
   <2> Example of the pattern with the most visible horizontal streak
   

I hope it helps!!!

Hi morshi. I found a potential solution to your problem with your 5610 printing vertical lines at HP.com:

Vertical black lines or streaks

It's hard to tell from the rest of your message what other problems you're describing. I did find a troubleshooting page at HP that shows how to address general print quality problems:

Problem with quality of copies

If those links don't solve all of your problems, the Color printing issues page for the 5610 at HP has numerous other solutions:

Color printing issues

I know the name of that last link may seem misleading since you haven't described color printing issues, but the links on that page offer different general print problems and their solutions.

Good luck.

It sounds as though a cartridge is faulty. To determine which one, the easiest way is to run a page of text/block of colour through in yellow then cyan then magenta. which ever page comes out with the streaks on it will tell you which cartyridge to ditch and replace. Hope this helps Cops [email protected]