What does it mean when i get the error message print spooler services not running

I open the run command you can type: net start spooler
(You will get a message that says the print spooler service has started)
If you still have issues open the run command and type: services.msc
it will display a list, where you can find print spooler.

From there you can right-click on it and set it so it is started and runs automatically.

If you need any technical help on printer then you can reach at http://www.vtechsquad.com/

It could be the Print Spooler service on your computer. Make sure the service is running. - Browse to Start -> Run... and type in "NET STOP SPOOLER" (this will stop the print spooler service)

- type in "NET START SPOOLER" (this will restart the print spooler service)
Try to print again.

Type Services.msc in run in windows and when it opens look for print spooler service. Right click on it, click properties and the start the service and you are done. Service will be started and you will not get this error in future.

Thanks !!!

reinstal the driver with print spooler running, good luck

The print spooler stop. This is the meaning of the message. What you can do is to restart the print spooler. Here's how:

Start >Run > type "services.msc" (w/o quotes) > click on Print Spooler.

Then you will see the word "Print Spooler" on the upper-left and you will see "Stop the service" and "Restart the service". Click on Restart the service and then close the window.

Try printing again.

Hope this helps and have a great day!

Try This :

Click on Start >> Run >> CMD >> OK

Type in SC CONFIG SPOOLER DEPEND= RPCSS

Press Enter

Then try to restart the compter

Then try to restart the print spooler this should resolve your issue
otherwise get me the exact error message you are getting

Regards
Sandeep

Completely uninstall the printer driver and install again. If this does not work, there is a corruption in the windows registry or in the print spooler cache files.

For a temporary workaround, disable print spooling. But, if you do, you will need to remember to never close an application you print from until printing is actually finished.

I appreciate the opportunity to help you. Try the following:

Check dependency services on Print Spooler
================================
1.Click "Start", input "services.msc" (without quotation marks) to Start Search bar and press "Enter".
2.Double click the “Print Spooler” service.
3.Choose “Dependencies” Tab and remember the services name.
4.In the service list window, find the dependency services and try to start them.
5.Please try to start the “Print Spooler” service again.



See if this helps. If it does, please fill in the rating of my service to you. Thanks for using Fixya.com

Ok what that means is you need to re-enable the printer spooler service on the computer, below are the directions to do so

1. Hit the "Start" button
2. Hit "run"
3. In the run box type "services.msc"
4. Hit "Enter"
5. A box will come up with all of the services , scroll down to "Print Spooler"
6. RIght click on "Print Spooler" and hit "Restart"
7. Right click on it again and hit "Properties"
8. In the middle is a drop-down box that says "Startup Type" , select "Automatic"

That should fix you right up!

hi! Print Spooler is actually a service for your Operating system-
Try this

Click on start and click on run
in the open box type in services.msc and your services local window should open, scroll down and look for print spooler, highlight it and do a right click and on the dropdown menu left click on stop and it will go to a process of stopping the service and then right click back and click on start. if you get an error message about print spooling or spooler, then that means you have a problem with the operating system. call or go to microsoft help and support online in that case. and RPC server unavailable error has something to do with a network printer. but i believe you setup the printer locally.

You can email me at [email protected]