My lexmark x3330 wont print it is saying cartridge error #1203

The 1203 error indicates either a communication problem between your cartridges and your printer or a short in one of the cartridges. Please follow the steps below to identify and fix the issue:

1. Make sure the printer is on.

2. Open the printer cover. The print cartridge carrier moves and stops at the loading position, unless the All-in-One is busy.

Note: If the carrier does not automatically move to the center, turn off the printer/unplug the printer from the power source and then slide the carrier to the center.

3. Remove both cartridges from the carrier.

4. Close the printer cover.

5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

6. When the printer turns on, reinsert one cartridge first.

7. Close the printer cover and check for any errors.

8. If no error appears, reinsert the other cartridge. Close the printer cover.

9. Replace whichever cartridge is causing the error to appear with a new cartridge. Then try to print a document again to verify that the problem is fixed.

This article in the Lexmark website will help you identify and resolve the 1203 cartridge error problem: Troubleshooting a 1203 Error Message on the Lexmark X5400 Series

Here is what Lexmark says:

Cartridge Error: 1203 Your print cartridge has a short.

1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.

If this does not resolve the problem, see More troubleshooting options, or replace your cartridges.

Also the cartridge that should be installed looks like Lexmark 32 ink for black and 33 ink for color.

Cartridge Error: 1203 Your print cartridge has a short.

1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.

Hope this helps

Hi,

Error 1203 is a cartridge error, please contact the store where you bought it or Lexmark costumer support so they can replace the cartridge.

Good Luck,
GetAFix99

1203 Printhead

short-circuit in
printhead.

Replace print
cartridge(s).

Try this may do the trick
ERROR 1203 LEXMARK ERROR 1200 Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...

1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again..
or
2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.

These steps are for a Lexmark 4200, but I suspect they will work for your printer as well:

Cartridge Error: 1203

Your print cartridge has a short.

1. Press Power to turn your All-In-One off.
2. Unplug your All-In-One from the wall outlet.
3. Plug in your All-In-One.
4. Reinstall the cartridges.

If this does not resolve the problem, see More troubleshooting options, or replace your cartridges.

Source: http://www.lexmark.com/publications/pdfs/4200/eng/trouble.html

Error 1203 on a Lexmark is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad... I would suggest you to try cleaning the copper contacts of the both carts and cart slot in the printer and try again..

If that doesn't work just call up their support number and check for replacement..

Normi, The 1203 error as you suspected deals with the ink cartridge. This is a common problem and Lexmark has a troubleshooting procedure posted on their web site. Here is the link for the web page. http://support.lexmark.com/cgi-perl/knowledgebase.cgi?ccs=229:1:0:439:0:0&emeaframe=&docid=ENUS21870 Hope this solves your problem and please don?t forget to rate this posting.