Installation error code ox80070643 - Targus Computers & Internet

https://answers.microsoft.com/en-us/msoffice/forum/msoffice_install-mso_windows8-mso_2013_release/error-code-30089-13/93a41c3a-1edc-4f6b-a80b-b6a23b51bcb9


Error Code 30089 13

Switch the Printer OFF and ON again and wait for the initialization. If the Error code continues to appear, switch the Printer OFF. Remove the EIO Card (if installed) and make sure that the Hard Disk Drive is installed correctly by pushing it firmly inwards and checking that the two installation screws are completely tightened. Switch the Printer ON again. If the error codes 09Axxx or 09Bxxx appear then replace the Hard Disk Drive. If the Error Code disappeared after removing the EIO Card, then switch the Printer OFF and reinstall the EIO Card, making sure that the two installation screws are completely tightened. Switch the Printer ON again. If the Error Code reappears, then the EIO Card could be faulty. Replace the EIO Card. If Error Code 09Cxxx appears after initialization, then replace the Electronics Module. Once the Error Code has been solved, print an Internal Demo Print to make sure that the Hard Disk Drive is functioning correctly. If the Error Code reappears, then use the above information to troubleshoot the problem.

This error code only occurs when using Windows Installer version 2.0 and Windows XP or later. If Windows Installer determines a product may be incompatible with the current operating system, it displays a dialog informing the user and asking whether to try to install anyway. This error code is returned if the user chooses not to try the installation. http://www.symantec.com/connect/articles/windows-installer-exit-error-codes-log-files

Try to update printer driver to your system and use cable first time to install and configure.

Error Code 0xE0000007 for Microsoft Office Outlook and Windows Updates

Important: Device Manager error codes are exclusive to Device Manager. If you see the Code 28 error elsewhere in Windows, chances are it's a system error code which you should not troubleshoot as a Device Manager issue. Cause of the Code 28 Error A Code 28 error is caused by a missing driver for that particular piece of hardware. There are any number of reasons that a driver might not be installed for a device but your troubleshooting of the problem will be the same no matter the root cause.
Error Code 28 Troubleshooting

1. Restart your computer if you haven't done so already.
   
   There is always the slim chance that the Code 28 error you're seeing in Device Manager was caused by a fluke with Device Manager or in your BIOS. If that's the case, a reboot might fix the Code 28.
   
   
2. Did you install a device or make a change in Device Manager just before you noticed the Code 28? If so, it's very possible that the change you made caused the Code 28 error.
   
   Undo the change, restart your PC, and then check again for the Code 28 error.
   
   Depending on the changes you made, some solutions might include:
   
   
   • Remove or reconfigure the newly installed device.
   • Roll back the driver to the version prior to your update.
   • Use System Restore to undo recent Device Manager changes.
     
3. Update the drivers for the device. Installing the latest manufacturer supplied drivers for a device with the Code 28 error is the most likely solution to the problem.
   
   Important: Make sure you install the drivers for the correct operating system. For example, if you're using Windows 7 32-bit, install the drivers designed for that specific version of Windows. Many Code 28 errors are caused by attempting to install the wrong drivers for a device.
   
   
4. Install the latest Windows service pack. Microsoft regularly releases service packs and other patches for their operating systems, one of which may contain a fix for the cause of the Code 28 error.
   
   Note: I do know that certain service packs for Windows Vista and Windows 2000 have contained specific fixes for some instances of the Code 28 error in Device Manager.
   
   
5. Replace the hardware. As a last resort, you may need to replace the hardware that has the Code 28 error.
   
   It's also possible that the device is not compatible with this version of Windows. You can check the Windows HCL to be sure.
   
   Note: If you still think there is still a software/operating system component to this Code 28 error, you could try a repair install of Windows. If that doesn't work, try a clean install of Windows. I don't recommend doing either of those more drastic options before you try replacing the hardware, but you may have to if you're out of other options.

Please let me know if you've fixed a Code 28 error using a method that I don't have above. I'd like to keep this page as updated as possible.

The server should have a make and model number on the front or back of the server.

If it was custom-built then you need to open it up and identify the motherboard.

Once you know this you will know what parts and driver software the server uses.

If you need more information please post a new question that explains why you need this information. Not knowing what you are trying to do with the identity puts me at a disadvantage.

If this helps please vote for my solution.

BTW: 0x80070643 is a memory address which won't help identifiy your server.

Unplug external USB devices and wait for sometime,now reset our machine and access in safe mode, run Reginout Scan.

When you got this error were you running the installation wizard disc for AT&T?
Because as far as my knowledge with AT&T (Bellsouth) this error code comes out when installing the modem using the Installation Wizard CD, this comes out on a version 3 cd. The error code means
"Failed to Upload to ISP" this possibly could mean that you are not connected to the internet.

Are you running Windows? It will not work on a Linux System. (Not sure if it runs on a Mac)