I can not get my computer connected to my wireless computer which is a windows xp I lost the lexmark cd

Hello. Try to run the installation cd in your computer again. If you haven't tried to uninstall the software from your computer, the cd should give you three options: Install a Printer, Repair/Update and Install Additional Softwares. Choose Repair/Update and just let it run and finish the installation. Also, make sure to allow all Lexmark and printer communications in your firewall. Try to scan wirelessly again. If problem needs further troubleshooting, I advise you to call Lexmark.

Setting up a Lexmark Z2420 on a wireless connection is a straightforward process, but it can vary depending on your specific network configuration. Here are the general steps you can follow to set up your Lexmark Z2420 on a wireless connection:

1. Connect the printer to the wireless network: Turn on the printer and make sure it is in range of your wireless network. Press the Wireless button on the printer's control panel to access the wireless menu. Use the navigation buttons to select "Wireless Setup Wizard" and then press OK. Follow the on-screen instructions to connect the printer to your wireless network.
2. Install the printer software: Insert the installation CD that came with your printer into your computer's CD drive and follow the on-screen instructions to install the printer software. If you don't have the installation CD, you can download the software from the Lexmark website.
3. Add the printer to your computer: Once the software is installed, add the printer to your computer by following the on-screen instructions. You may be prompted to enter your wireless network name and password.
4. Test the printer: Once the printer is connected to your wireless network, test it by printing a test page from your computer.

It's important to note that the steps may vary depending on your specific network configuration, and it's best to consult the manual or the Lexmark website for the specific instructions. Also, it's important to make sure that your computer and the printer are connected to the same wireless network and that the network is working properly before attempting to connect the printer. If you're still having trouble setting up the printer, you may need to consult the manual or contact Lexmark customer support for additional assistance. if i help my cashapp $ralphpapi

I suggest emailing lexmark and telling them u need a disc for a Lexmark X2550 printer. Maybe tell em yours didnt come with one when u bought it and be firm...or you can continue to try and download it from the internet.

http://printers.free-driver-download.com/Lexmark/12609/Lexmark-Z11-Color-Jetprinter-Driver-5.00.2134.1-Win2000-XP.html
download from here.

vista open devices & printers add printer connect direct via cat5 patch power cycle lexmark

Is is a wifi connection? What type of connection do you use? Adhoc or infrastructure(meaning does it pass through the wifi router or direct to the laptop)?You may have to reconfigure your wifi.

You can go to this link and just select the opearting system that you're using on your computer Ex. windows XP then after that you can now download the software for this printer..
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:479:0:0

Hope that helps.............

lost cd

Lost CD need to install Lexmark 7300 data, fax, printer to my windows xp, new hard drive just installed.

i lost my disc to install my printer i have a lexmark z25
help