20 Most Recent
NEC Electra Elite 32D-1 Corded Phone - Page 3 Questions & Answers
Call Forward not working
Sounds like an IPK2. try just entering the forward destination in the first 2 fields. Why would the person being forwarded need calls? If you are forwarding his phone he can't receive calls. unless your just forwarding to vmail. cheaper rates at ldtsnj.com
When people dial our main
Hi,
You need special NEC software. The program is called SAT and it is proprietary. The version of SAT that you need is dependent on what software level your 48 is at. Also you will need a MIF-M card to allow pc programming, otherwise you have to do it through the telephone set.
Thank You
Adding/Changing Name to NEC multi-line phone
On an NEC Elite you must enter system programming to change the name of the extensions. Unless you have a PC connection to the system this is somewhat complicated. If you would like me to step you through the system programming, please contact me @ 850-326-0394.
Changing a display name
it depends on the phone system type. The name changes are done in programming mode. But to enter programming varies by system. You need tech support.
Changing a voice message
You must access system manager in the system. Call your office and get the main greeting than dial 632 for system manager. You must know the password to get in. than listen for mgr options. than listen for opening greetings. Remember 1=yes 2=no.
LDTSNJ.com
TELRAD AVANTI 3020 & 3015
Avanti Model 3020F or 3020H Display telephones
1) Leave the handset on-hook.
2) Press the FEATURE button.
3) Press the PROGRAM soft key.
4) Press TIME soft key.
5) Enter the time in the 24 hour clock format of HHMM. Use a leading 0 for single digit numbers.
6) Enter the date in the format DDMMYY using a leading 0 for single digit numbers.
7) Press SAVE soft key to save the settings.
Note: All 10 digits for the time and date must be entered. You can not skip any steps. To abort the time and date setting process press SPKR at any point before pressing SPD/PROG.
Avanti Model 3015DF or 3015DH Display telephones
1) Leave the handset on-hook.
2) Press the FEATURE button.
3) Press the PROG soft key.
4) Press TIME soft key.
5) Enter the time in the 24 hour clock format of HHMM. Use a leading 0 for single digit numbers.
6) Enter the date in the format DDMMYY using a leading 0 for single digit numbers.
7) Press SAVE soft key to save the settings.
Note: All 10 digits for the time and date must be entered. You can not skip any steps. To abort the time and date setting process press SPKR at any point before pressing SPD/PROG.
Speaker picks up automatically
callers maybe calling you and than pressing 1 to voice call you. Dialing your extensions than 1.
Pick up the handset before pressing speaker.
NEC DTU-32D
Have you tried the answer key by itself? Usually feature and answer turns it back off.
Callers say they cannot hear me
Yes it very well could be your phone lines and not the system. Call your provider and tell them you have low speech path on your lines. They will troublshoot it.
NEC Electra Elite
you need to access program mode. Did you contact your nec vendor? ldtsnj.com
Forwarding to an outside line..?
Call forward off net needs to be allowed in Class of Service. If it is not than it must be programmed in. If it is than use your forward all code enter 9 and the full phone number.
Display Problems
The only way to darken or lighten the display is to use the arrow keys when the phone is idle. try unplugging the phone and plug it back in. If that does not work you need to replace the phone.
Not finding what you are looking for?