20 Most Recent Acer AL2671W 26 in. LCD Television - Page 6 Questions & Answers

You can use the "RGB" input in the video input menu of the TV. If you don't have that then you can't hook the PC to this TV.

Almost .

First you will need to find out your wifi connection is ok or not basically, If you are having a slow Wi-Fi connection problem, its not the adapter, but might be the router. I found this article, which might help you to solve your problem. How to Change Wi Fi Channel for Your Router

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.

The tv that your acer is detecting but showing no picture might have an unsupported screen resolution. Your acer might be able to handle a tv with *1280 x 1460 resolution but not one with a *1800 x 2200 screen resolution (* just random numbers for an example) hope this helps

Take your Shaw Remote Control, and read the instructions on the back. Follow those instructions. If that does not work, just telephone Shaw, and ask for Technical Support for TV, and a customer representative will walk you through the process.

Try a hard reset to this set, and check. If it do not help you, the main board to this set is faulty. There are two types of reset to TVs. The first is simple to do; a Hard Reset; and the other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight; will be better. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

the tv has a fault most often the backlight system on the panel so take it to the tv shop its too hard to repair LCD backlights unless you have the right tools and jigs for the panel to be lifted off correctly they should charge around £50 max ....

looks like the same problem i have with my 32" acer tv, it seems to be a problem of acer TVs get someone to check the capacitors in the power supply.... I think one might be bad.

Make sure the item connected to the component is turned on. Also try a different TV or take it to a friend and see if it works there. That will at least narrow it down to the TV, cable, or the actual component.