20 Most Recent
D-Link DCS-6620 Network Camera - Page 7 Questions & Answers
Online chat
You will have to do a manual factory reset. with the power on, find a small hole usually on the back side of the router. Using a pencil of tip of a paper clip, push it into the hole for about 10 seconds. This should reset to router to factory settings and erase any password information.
Change language back english
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.
User manual for DSL-3780
Go to the D-Link website under the support section and look for your model of router. There should be a downloadable manual in PDF format.
DIR 503
Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.
How to speed up internet network
The speed of your internet is determined by your service provider and their modem. If possible, connect directly to the modem to check the speed. If you suspect you D-Link router is not allowing you to get full internet speed, first a Hard Reboot of you Router and Modem.
If that did not solve the issue, try a known working LAN 5e cable between your modem and router. After you have established it is not a cable issue, do a factory reset.
I had an issue where my speed to the internet modem was fine, but the router LAN connections only provide a faction of the internet speed. After testing cables, etc I did a factory reset and it restored full connection speed on my router LAN ports.
Disable custom error 404 page
Um, no offense, but did you even read my message before posting that reply? I'm not having connection issues. There is nothing wrong with the wifi, or with the router's connection to the internet.
My problem is that, when I try to go to a URL that does not exist, e.g. http://no.such.url, instead of seeing a 'Could not find the sever specified' page, I get redirected to http://dlinkrouter/error-404.htm.
I'm confident that this issue is cause by the router, not by the ISP, since it is redirecting to a page served by the router itself.
for more help visit
CBR Tech Solutions
What is router
Basic steps to configure your router:
- Set Up IP Address and Sub-net Mask for their router.
- Now open the router Web Page by 192.168.0.1 in the browser URL.
- Login with your User Name and Password.
- For Manuall Configuration and Set-up router according to your ISP.
Router have different configuration according to Model. for more router support http://support.dlink.com/ and any router related technical support D-Link Router Support .
Why wont my tablet authenticate
Check to make sure you have the correct wifi password and that other devices can connect to the same wifi using that password. Power cycle your router. If those dont work might have to try changing the Wifi security encryption type to WPA or WPA2. Would need to login into your router to do this.
Not finding what you are looking for?