20 Most Recent D-Link DCS-6620 Network Camera - Page 6 Questions & Answers


The router is not connected to the internet. Check the cable from the router to the modem - try a new cable. Reboot both devices. Connect a computer directly to the modem to make certain you have internet.
The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


Try rebooting the router and your internet - modem power off for 10 seconds then back on. Make certain your modem is connected to the internet by directly connecting with it using a LAN cable. If it is OK check the LAN cable between the to units - try a new cable.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


Usually indicates problem with the router's internet connection. Check the LAN cable between your internet modem and router and try a new cable. Reboot both devices. Direct connect to the internet modem to see if it is working correctly with interruption.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


The router login or wireless network password.

Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method.

The router password you will have to try The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can set-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


You do not need the disc. Using you browser, login into the router using the default IP 192.168.0.1 unless this has been changed and you should be able to configure your router.

D-Link Computers... | Answered on Jan 06, 2017


Depending on the model, D-link used 192.168.0.1 for many of its routers but on some a different one - or if previously owned this may have been changed.
The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


Login in using your browser and go to the wireless settings and set-up a wireless password/key. Remember the key because each device will now need it to connect. You can also turn OFF Broadcast SSID and your network name will not be shown on anyone's device. You must remember the network name when using this method.

D-Link Computers... | Answered on Jan 06, 2017


Usually that indicates a fatal issue. But try The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


The network password or the login password?
Login into you router using your browser (connected by a LAN cable) and under the wireless section you should see the network password.

The final solution is a factory reset of your router. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


Try a facotry reset. You can do a factory reset by logging into the router using you browser. Go to the settings and perform a factory reset

If you forgot the router password, you ill have to do a factory reset by locating a small hold on the back of the router and insert the tip of of paper clip for about 10 seconds while the power is on. The router will be reset to out of box status and then you can ssets-up form scratch.

D-Link Computers... | Answered on Jan 06, 2017


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link Computers... | Answered on Jan 06, 2017


Try a factory reset. login to your router and under setting go to factory reset. Once done you will have to set-up you device from scratch.

D-Link Computers... | Answered on Jan 06, 2017


Did you do a factory reset? That will restore it to it original out of box settings and often solves many issues. If that does not solve the issue, you may have a dead router.

D-Link Computers... | Answered on Jan 06, 2017


You can perform a factory reset by logging into the router and under admin settings select factory reset. You can also do it by locating a small hole on the back side of the router, and using a tip of a paperclip insert it into the hole for about 10 seconds with the power on.

Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link Computers... | Answered on Jan 06, 2017


The blinking triangle light indicated the wireless portion of your router is active and sending/receiving connections.

D-Link Computers... | Answered on Jan 06, 2017


You will have to do a manual factory reset. with the power on, find a small hole usually on the back side of the router. Using a pencil of tip of a paper clip, push it into the hole for about 10 seconds. This should reset to router to factory settings and erase any password information.

D-Link Computers... | Answered on Jan 06, 2017


Usually you can login on your browser to you router and go to the management section to check for firmware updates and select that button and it will download and install the firmware. On some models, you have to go to the D-link web site and look for firmware updates for your router. Always check what you current firmware you have installed and check the version of you router modem (A, B, C etc). Then you can manually download the firmware (usually in a ZIP file), open the zip file, and then using your browser connected to the router look for Update Firmware. You will have to go to where (folder) you saved the downloaded update and select that file. It is recommended that you update using a LAN connection and not a wireless connection.

D-Link Computers... | Answered on Jan 06, 2017


Go to the D-Link website under the support section and look for your model of router. There should be a downloadable manual in PDF format.

D-Link Computers... | Answered on Jan 06, 2017

Not finding what you are looking for?
D-Link DCS-6620 Network Camera Logo

Popular Tags

19 questions posted

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4368 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

DCS D-Link

  • DCS D-Link

Most Popular Question

need d link dcs 6620 software

  • Computers & Internet
Loading...