Panasonic KX-T7731 Corded Phone - Page 8 - Answered Questions & Fixed issues

Besides system programming of what to do with the 301st call, you need to program 2 lighted buttons on your set for 96 and 97 CID Indicate-Common and CID Select-Common. It will now display all CID calls into the system, assuming you have CID working.

This is for the TA-824 series Key Service Unit, which is a common system for the 7731 phone to be connected.

Hello, with the handset still on the cradle / hook, press * or # until the desired view is displayed.
Thank you.

While the handset is still on the cradle/hook press * or # until the desired view is diplayed.

If this was helpful please rate / vote
Thank you

While the hanset is on the cradle press # or * until the desired display is shown. If that does not work press the info key below that is shown on the screen.

Plz go to menu u will find time settings

Rate me bro

You must be on the main phone on jack 01 to set time. You can determine if your phone is jack 01 by pressing PROGRAM and then pushing the number 6 on the dial pad. The phone will read the jack and extension number. When you have determined the jack 01 phone, do the following.

1. Push PROGRAM key
2. Dial "0"
3. Enter year (last 2 digits)
4. Enter month (01-12)
5. Enter day (01-31)
6. Enter day of week (Sun 0, Mon 1, Tue 2, Wed 3, Thu 4, Fri 5, Sat 6.)
7. Enter Hour (01-12)
8. Enter Minute (00-59)
9. Press 0 for AM 1 for PM
10. Press "AUTO DIAL/STORE" key
11. Push PROGRAM key to return to normal mode.

Hi Ashley!

Check out page 158 of your OM. It's the list of codes for features access and it requires a CO button. Press PROGRAM 94107 STORE.

Carl

There is not a reset button on a TA-624 or newer Panasonic, which is consistent with when the 7731's were first delivered, but there is an ON/OFF switch.

Your description is a bit confusing. You press HOLD to put the outside line on hold, which would give you internal (intercom) dial tone. If you have a PAGE key (we like to use the upper right button) press that, or dial the page code, make your announcement and hang up.

There are some page transfer codes and some pickup codes mostly involvine 34 and 43, and those are covered in the User Manual. The feature you descrobe above seems to be from using the TRANSFER button instead of the HOLD button. Pressing the PAGE button without HOLD may give you the same symptom.

Carl

Since CID display to the phone comes from the Panasonic phone SYSTEM, you might try looking inside the cabinet to see if it has a caller ID card. The part ends in 93.

It also requires some programming. If you post your model number, I might have a CID card if yours is missing.

Carl

There are template websites out there but you have to pay for them. Try Desi.com. I, myself, am trying to find free templates but have had no luck.

If the call is coming in on another line, you can turn call waiting on for the phone. In a TA series system, it's done by the code 7311# for CO calls and 7321# for Intercom and doorphone calls. A 0 before the # instead of 1 turns it off.

Carl

This is a guess because you still didn't tell me what system you're connected to. On an idle phone, try pressing PROGRAM 131 STORE. In a TA-824, that makes you select line 1. If it's busy, nothing happens.

Carl

It's an intercom extension. If the sytsem is a TA, it has numbers like 107 or 115, or whererever you put the "answering machine." If it's a TD, then 165 is usually the default. If it's a TAW, then 500 is the default.

Carl

Hit program 0 and enter date in YY/MM/DD format. The time should then be displayed. This has to be done from the administrative phone, usually extension 101.

http://www.retrevo.com/s/Panasonic-KX-T7731-Telephones-review-manual/id/2878ag021/t/1-2/

The manual is above.

hi,
CLICK HERE

clicking above will take you to a site that will let you download the owners manual for free and should tell you everything you need to know.

Let me know how you get on or if you need further assistance ok

Either make sure yuu're trying it from the phone in jack 1, find out who changed it, or try the following:

If you have a TA system, you can program the time from the phone connected to jack 01 (usually ext 101) by pressing PROGRAM 0 and dial YYMMDDwHHMMa STORE where the time is in 12 hour format, the w is day of the week, with Sunday being 0 and a is 0 for AM or 1 for PM.

Carl

Press PROGRAM the button for CO1 and dial 01 STORE Press PROGRAM to regular mode.

Carl

There are a few types of phone sytems that work with the kxt 7731. these instructions should handle most of them.
Changing the time on a Panasonic KX-TA624 system must be done from extension # 101 using a display phone. All others can use any display set. 1.- Press the "PROGRAM" button on the face of the phone
2.- Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234)
3.- Enter program # 000 4.- Press "SPEAKER" button 5.- Press "FORWARD/DND" button to change to the hour selection 6.- Press "TRANSFER" button and enter the hour 7.- Press "FORWARD/DND" button to change to the minutes parameter 8.- Press "TRANSFER" button and enter the minutes 9.- Press "FORWARD/DND" button to change to the AM/PM parameter 10 Press "MUTE" button to select AM or PM 11.- Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed) 12.- Press "HOLD" button 13.- Press the "PROGRAM" button on the face of the phone

There are a few types of phone sytems that work with the kxt 7731. these instructions should handle most of them.
Changing the time on a Panasonic KX-TA624 system must be done from extension # 101 using a display phone. All others can use any display set. 1.-
Press the "PROGRAM" button on the face of the phone
2.- Enter programming mode by pressing "STAR" - "POUND" - "1234" (default password = 1234)
3.- Enter program # 000 4.- Press "SPEAKER" button 5.- Press "FORWARD/DND" button to change to the hour selection 6.- Press "TRANSFER" button and enter the hour 7.- Press "FORWARD/DND" button to change to the minutes parameter 8.- Press "TRANSFER" button and enter the minutes 9.- Press "FORWARD/DND" button to change to the AM/PM parameter 10 Press "MUTE" button to select AM or PM 11.- Press "STORE" button (listen for 1 tone if procedure was executed correctly / 3 tones if procedure failed) 12.- Press "HOLD" button 13.- Press the "PROGRAM" button on the face of the phone