20 Most Recent Sharp R-1610 Microwave Oven - Page 9 Questions & Answers

It's probably a defective bottom door switch, or the amount for the bottom door switch is loose, misaligned, or broken.

You should be able to find a parts diagram and find the part you need here: http://goo.gl/zWz6Bz

Either the high voltage capacitor or the high voltage diode has failed. Its possible that the magnetron has open circuited but its unlikely. Get someone who knows microwaves to have a look. Be warned ! These high voltage parts can cause serious injury or kill you if you are not careful.

see this steps and fix it. God bless you Reset the clock. Press "Clock" and the correct time, using the number pads. Press "AM/PM" if applicable, and press "Start" or "Clock" to confirm.

2 Press "Timer On/Off" to reset the timer if nothing on the touch pad will operate. Use the number pads to select a new timed amount, if desired, and press "Timer On/Off" to start. Press again to cancel.

3 Press and hold "Clear/Off" for three seconds if the timer will not function or is blinking when you touch the pads. This will release the "Child Lock" feature. Make a new touch pad selection.

4 Disconnect power to the microwave if following Steps 1 through 3 does not resolve the blinking timer. Wait a few minutes, and then restore power to reset the microwave.

However if the problem persist the display boardmain control board is faulty

http://siica.sharpusa.com/portals/0/downloads/Manuals/R-1870_R-1871_R-1872_Microwave_Operation_Manual.pdf

IT MEANS THAT ITS TOO HOT AND PULL THE BUTTEN OFF

The buzzer is responsible for beep,it is mounted on PCB assembly,either remove the same or cut the supply sourse to it.

o sintoma e de maus contactos. e aconselhar levar a um t?cnico para resolver.

It shows that microwave is not working,check supply of HT transformer,Check HT diode diode by replacing still problem than replace megnatron.

The fuse is given inside the microwave next to the mains cord connected inside , it can be checked by series tester or by a multi meter ,it must provide the continuation.

You may be able to pick up a user manual at Manualsonline.com or some other online manual website.

Go online and pull up repairclinic.com they will most likely have what you are looking for and at a reasonable price. You can choose how you want it shipped. Overnight will cost more but regular shipping will get your part to you in 7-10 days. I hope this helps.

YOU CAN THANK SEARS HERE IS YOUR MANUALMAYBE MORE OF US SHOULD SHOP THERE.https://www.searspartsdirect.com/partsdirect/user-manuals/r9h94b-sharp-parts-manual

Did you check the turn table on off switch on the main control board......Or the board could be the problem.

how old is it??,, sometimes electronics go out due to age or lightening storms, but you shud be able to find the same model or newer model here>>>www.discountbargainprices.com

That part doesnt appear to be available anymore

Remove outer cover and check if you did not have a spillover from something you last cooked as the center where the turntable fits on has a opening under it and liquid could have leaked through

It's probably an issue with the bottom door switch, or its mount. It's a pretty easy DIY fix. Feel free to e-mail me via my site, and include your full model number (or even better, a picture of the model tag) and include your detailed symptoms to let me know what's happening or not happening, and when it happens. - Ed Miller http://www.microwavecontrol.com

You can find helpful diagrams and parts lists here:

https://www.searspartsdirect.com/model-number/r9h83/0958/0123245.html

The fuses located on the door switch mount between the door switches.

You will need to remove the outer wrapper, then you can access the fuse.

- Ed
http://www.microwavecontrol.com

Possibly the manual: https://www.manualslib.com/products/Sharp-Carousel-2-R-9h83-5887063.html

The bottom door switch is defective due to opening the door while it's cooking instead of pressing the "stop" pad first, or less likely, the bottom door switch's mount is loose, misaligned, or broken. See my help files here: http://www.microwavecontrol.com/safety.htm http://www.microwavecontrol.com/disassembly.htm http://www.microwavecontrol.com/doorsw.htmThe service manual is here: http://www.microwavecontrol.com/r930cs_sm.pdf Feel free to contact me directly through my sight with your model number and symptoms if you need further assistance.