20 Most Recent Sharp R-1610 Microwave Oven - Page 8 Questions & Answers

Free manual online for similar model: https://www.manualslib.com/manual/428690/Sharp-R306lw-Microave.html

Using an electrical tester will determine the cause within a short time.

Using an electrical tester you will be able to trouble shoot the issue quickly.

circuit failure

You can try and unplug it for 5 minutes, push the on button to make sure it's completely discharged. Then plug it in. If it does the same thing, it's toast. Getting it repaired will cost about the same as a new one on sale.

if the display does light up but it wont turn on, Broken door switch, broken in the Open position. But if there is no display at all (no clock, for example) then look at the power supply chain (including the fuse)

Level it and it might fix this t

Something must have spilled into the mechanism and dried there. You'll need to access and clean it out.

Download pdf manual https://elektrotanya.com/sharp_r-8460_r-8560_sm.pdf/download.html

Hi Timothy, your Microwave Sharp Half Pint, does not have any receptacle for batteries, therefore, if unplugged, it cannot generate any sound As Robert Oliver suggests, notice that another device nearby, that if it has batteries, may be making that sound I hope you find the origin of the beeper Greetings Franco Dosil Hola Timothy, tu Microondas Sharp Half Pint, no posee ning?n recept?culo para bater?as, por lo tanto, si esta desenchufado, no puede generar ning?n sonido Como te sugiere Robert Oliver, f?jate que otro aparato pr?ximo, que si tenga bater?as, pueda estar haciendo ese sonido Espero que encuentres el origen del emisor de pitidos Saludos Franco Dosil

You should check for 3 volts on sec coil supply for magnetron but do this check with the hv capacitor and hvr disconnected if 3volts is present , most probably your magnetron is deffective, replace it with the same type

Sounds like a door latch needs an adjustment that only a qualified technician can perform for safety reasons.

Try unplugging uni t for 10 seconds,then plug back in. If that doesn't work, contact a technician. For service.

Check your users manual for installation instructions. then reverse engineer them.

Needs a new screen. May be uneconomical to repair.

Contact Sharp

Consult users manual for programming instructions visit www.repairclinic.com for manuals on your particular model.

manufacturer or online search