LG LRSC-26922 Side by Side Refrigerator "ice dispenser door stays open" Questions

...flap to stay open jsut a bit. This open space will create an ice dam in teh dispenser thus not allowing the ice to dispense. The repair is generally made by replacing the flap assembly. All the

Ice dispenser comes on by itself. I opened the door to the freezer and when I closed it the ice dispenser began operating. Becasue the actuator was not pressed the ice began backing up inside the ...

...ice dispenser discharges crushed ice instead of the chosen whole ice. At least yours is making ice. Mine wount even make ice. While toubleshooting my prob, I notice a metal rod on the bottom of the ...

...ice dispenser flap is supposed to close when ice isn't being dispensed. Instead it stays open and moisture enters the freezer compartment. I had a similar problem once. i opened the door and used a ...

...dispenser door flap. You can remove your ice bin and with the door open (holding freezer light switch closed) hit the ice lever and watch to see if the door opens or not from the inside. The rotary ...

ice dispenser button is released. Mine had a habit of catching and staying OPEN. This allows warm air to enter the dispenser / freezer compartment causing your problem. If it is stuck you have to take

Ice dispenser won't dispense whole ice cubes, only crushed I have a Kenmore Refrigerator with an Ice maker part number 25352642300 and it only dispenses crushed ice because the sliding cover won't ...

ice maker dispenser door I don't know if I will describe this problem correctly; The black rubber door that opens to dispense ice when thh lever is compressed by a glass is not closing on it's own. If

ice and water in the door. Icemaker works as it should but when the lever is pressed to dispense ice, the lights on the door dim, the flap in the door opens, but nothing else. Water is dispensed fine.

ice dispenser chute I keep getting frost buildup in the ice despenser chute and thus the ice gets trapped in the chute when dispensing. I think there is a problem with the chute flapper door not ...