How do I change the drivers side front turn signal light. go up under car reach your hand up to light housing turn socket counter clockwise pull light out of socket
...Turn the black plastic ring to unlock and remove bulb. You will then be able to pull the bulb up above the headlight to work with. Replace. IAnother fine piece of engineering. Even if take out the ...
...turn signal doesn't work The drivers side rear turn signal doesn't work but the bulb works when flashers are on. Changed bulb, holder & connectors with no change. The turn signal switches are ...
Question about Dodge Cars & Trucks
turn signal not working. Changed bulalso changed socket locations ke lights work and back up right turn signal works. Seems you checked what you could and the only thing left is the turn signal switch
Question about Cars & Trucks
...changing out the turn signal/hazard flasher, and still nothing. I back probed the socket wire with the turn switch engaged and the tester light flashed. What do I check next? I only have a tester ...
turn signal bulb don't know how to get to turn signal bulb to change it. For Front turning signal, you need to remove the whole head light system to get to turn signal. 4 screws attach it to the car's
Question about Chrysler 300M
...turn signal sound all the time unless the br(ake) is pressed? Turn signals are not on nor are the hazards. Taryn, sounds like a faulty turn signal switch, or multi function switch is defective. Check ...
...turn signal flasher located for a 1993 Olds Cutlass Supreme S ?Both turn signals do not work.I've changed all bulbs, Checked, changed fuses.turn signals light, but do not blink. under the dash on the ...
Question about Cars & Trucks
...Turn signals and hazards stopped working after changing audio system. Fuses test good. Thank you, Mike Did you change any wiring , tap into any wiring ? There is no flasher relay on your vehicle . It ...
Question about Dodge Cars & Trucks
turn signal won't cancel, are there springs to replace or will changing the whole switch fix this problem? at first the left signal wold not cancel, then a snapping sound and now neither left or right
624 questions posted
Usually answered in minutes!
949 Questions
313 Questions
272 Questions
170 Questions
107 Questions
