20 Most Recent
2003 Chrysler 300M Questions & Answers
My 2003 Chrysler 300M 3.5L is seriously missing
Go to Autozone, Advance, etc.. any good parts store and OBII scan done (fault scan) they do this FREE. Scan will tell you what sensor(s) to go after to fix. Once you repair or replace sensor have parts store reset your light.
I have a 2001 Chrysler
Take the negative(black) cable off and wait a minute or two then replace it. Sometimes this will reset the service light.
Hood latch cable broke
simple solution get help from the repair manual to easily solve the problem if you do have manual then go to the given link http://toolsnyou.com/
Dash lights not working
Typical problem, the old failed solder joints on the back of the instrument gauge circuit board. You;ll have to remove the instrument cluster and carefully remove the circuit card (board) and locate the two regular rows of solder joints on the front side (inside) opposite the connector in the center. Reflow the solder with q low wattage soldering iron 25-35 watts and the problem disappears after re-installation.
Battery Draining on 2003 Chrysler 300M
Are you sure that all interior lights go off? Make sure the vanity mirrors actually go off when the doors are closed. Glove compartment light, map lights. Some had center console lights. Check for a short at the cigarette lighters. Use an ohm meter and check for continuity to ground at supply wires.
How to add freon to 2003 chrysler 300m with pictures
He is not an expert. This should be carried out at a garage with experience ofChrysler. It should be carried out only by qualified personnel, having an accident with freon can blind. Take it to a Chrysler man/woman is my advice, you will have the peace of mind that it has been done properly
Not finding what you are looking for?