1999 Ford Expedition "torx bit sizes" Questions

...lbs. ( 27 Nm). Tighten the caliper retaining bolts on the 1999-00 F-Super Duty models to 27 ft. lbs. (36 Nm.) Hope helps. the Torx bit that you need for that is a T-40 if memory serves me

...Torx bit? if it is any torx bit kit has that size. its not for security, its for fast , manufacturing. just about every store sells this, hardware or car. ...

...torx bit and grind down the tip of it so the bit engages a little bit more, since the bit tapers towards the end this would give much more of a positive engagement. Worked great after 3 minutes on a ...

...torx bit do I need to change rotors on 2005 ford freestar wrench and torx bit sizes needed to change rotors on 2005 ford freestar T45 holds the rotor in place. Today was just reconnaissance on that , ...

...torx bit do I need yo remove the engine cover from my 2000 Lincoln town car 4.6 liter engine? bolt has pin in the middle of it I don't know the actual size? When I buy torx bit, I buy them in a set, ...

...torx bit ..thinking t 20 is the size.. wait until dark and park abt 15 to 20 feet in front of a wall so you can see where your headlights are focused..turn torx bit and raise or lower to your ...

for the size of the torx bit required to remove the front caliper bolts. they are not regular bolts for a regular socket. Depending on what make and model the vehicle is it most likely a T-55 torx bit

...remove the brake caliper? The one that fits. You buy a set for 20 bucks! They are called Torx. https://www.homedepot.ca/product/husky-1-4-and-3-8-inch-drive-torx-bit-socket-set-11-piece-/1000774379

...torx bit. When you buy it make sure you can get it out of the socket.I've change two and the space is very limited. Put torx bit on and use a wrench to turn the bit.(if it comes out of the socket it ...

...torx bit for the caliper bolt? The correct size is a T55, which is NOT included in the 3 bit brake set sold at Sears. Fortunately I got the larger set. A note to all you mechanics out there - brake ...