1999 Ford Expedition "caliper bolt size" Questions

...need to know the size & type of the caliper retaining bolt. hex, star, allen? 9mm Hex Driver (allen) Snap-on is the only one with that tool I think Thexton came out with it last fall ...

size wrench to use to remove brake calliper I am attempting to change my breaks and I can not get the callipers off. What am I doing wrong and what do i need to get them off? Thanks for all your time.

...size torque bit to get brakes off? 1999 expedition To front pads, tighten the caliper pins to 16-30 ft. lbs. (22-40 Nm) on 1997-98 F-250HD, F-350 and F-Super duty models. Tighten the caliper pins to ...

2005 ford expedition brake question I need to know what size of allen head is used to remove the front brake caliper bolts/can you help? They should all be a 10mm..

...bolt and i was correct 99 percent of the time. I have found out that if I use a ratchet and socket with a star it is easier and with less effort. Contact me if you need more help. Thank you here are ...

size caliper bolts what size wrench fits the caliper bolts on a merc slk 230? ive tried metric, and af nearest fit is 5/8" AF but too loose these are the bolts that hold the caliper to the back ...

...2002 Trailblazer - 4 bolts on caliper. I loosened the top bolt with the pin, but when I try to loosen the bottom, it feels like I'm tightening it. Do I need to loosen all 4? it is a 3/8 allen ...

...bolt the right rear brake caliper bracket to the backing plate on a 2003 chevrolet silverado What size are the bolts? Did you break them? Your local part store will have have caliper mounting bolts ...

Bolt size that holds the caliper in place that would be great too. For a wrench or for the acctual bolt size. To remove front pads..you need 8mm allen socket to pull the caliper guide pins, then 17 or

size of the bolts that hold on the brake caliper housing and the bolts that hold on the brake caliper I believe the brake caliper bolts at the slides are 13MM hex and the bracket bolts are either 18MM