1991 Mitsubishi Mighty Max "valve adjustment" Questions

Ad

Question about Mitsubishi Mighty Max

1 Answer

need to know how to adjust the valves On Vehicle Inspection If a clanging noise due to the lash adjuster produced immediately after the engine has started or during operation persists, perform the ...

Ad

Question about Mitsubishi Mighty Max

2 Answers

Need the valve gap for 1991 mighty max I need the valve gap for intake and exhaust for a 1991 mighty max. Engine is 2.4 litre. Manual transmission. Does not have adjustable valves . It has hydrolic ...

Ad

Question about Mitsubishi Mighty Max

1 Answer

1994 mitsubishi mighty max valve tapping noise(occationally) when warm or cold. i took the valve cover off to try to adjust the rocker arms but it is non adjustable, what could it be? Bad oil pump? ...

Question about Mitsubishi Mighty Max

1 Answer

...product to fix this problem? also how to install a rear bumper on pickup. This noise is probably a valve lash adjuster, try hydraulic lifter treatment. If that does'nt fix if you will have to

Question about Mitsubishi Mighty Max

1 Answer

...line up thats with crank camshaft pullie and both balancer gears have markings. im not sure if valve will touch piston to make that noise by geting one tooth off revs up pretty good didnt do it ...

adjustment as well Being a commercial vehicle, it should have a load adjusted proportioning valve. These are designed to transfer breaking to the rear wheels under load, therefore stopping front brake

...my timing belt on a 1994 mightymax and want to know if i can just put new belt on or did i bend valves just want to know if the valves clear when the belt brakes no they dont clear they hit the ...

Question about Mitsubishi Mighty Max

1 Answer

...10 minutes. "set the lever on the second highest step of the fast idle cam. measure the primary valve to throttle bore clearance, manual trans .031 inch automatic trans .035 inch, if its off, ...

Question about Mitsubishi Mighty Max

1 Answer

Can the valves be adjusted?? You might have a clogged fuel filter or air filter. If those check out, look for a vacuum leak. It could be a bad fuel injector as well. I would advise you to check the ...

Question about Mitsubishi Mighty Max

2 Answers

...adjustment or cold start are not working to bring it to high idle cold start. mike May have the valve settings too tight making for low compression and no start. Cranks fast, good fire, good fuel, ...

Not finding what you are looking for?
1991 Mitsubishi Mighty Max Logo

210 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...