2008 Chrysler Town & Country "ignition lights stay" Questions

...with key removed. Running lights also stay illuminated. 2006 Chrysler Town and Country. think the ignition lock contacts have collapsed ,need a new ignition switch on the back end of the steering ...

...ignition key to the off position. A single chime will sound to signify that you have successfully completed the programming. It can be reactivated by repeating these steps. The alert will be ...

access to the BCM to see which door the module is seeing open. the locks won't lock with key in ignition and a door is "open

...lights stay on while driving and after the ignition is shut off. I would check your door jamb switches first, they are spring loaded and you can check them by pushing each one in and move your finger ...

...ignition swich, the drivers door swich, the interior lights relay the door chime is going when the door is opened but everything is turned off and I have the keys in my hand. Also I unpluged the ...

...stay at 2 or 3 when going 40 mph. What do I do? I have the same vehicle, is your engine light on or flashing? Put your key in the ignition, turn back and forth 3 cycles of on off. End in the on ...

lights(w/ or w/0 key in ignition.)BATTERY IS BRAND NEW!! All amber lights on temp control area are lit, these are the only lights. Power locks wont lock/unlock. Tried the activate/deactivate function,

...lights go through a self-diagnosis. After this stops, it the needle should go back to 0. TRY PRESSING AND HOLDING IN ON TRIP ODOMETER RESET BUTTON AND TURNING IGNITION KEY TO "ON"..DO NOT START ...

...area, you hear this noise is the times that the lights do not shut off..Power locks have also gone out durning all this and no longer work at all May be a bad ignition switch or a bad ecm(