Husqvarna 128 LD Weedeater "carb settings" Questions

...carb settings rebuilt carb but can not get it set up rite what are the carb jet settings Setting up the carb right on a trimmer is like setting one up on an RC gas operated car. It takes someone with ...

...replaced the spark plug and air filter and no change. You either have a air leak in a fuel line, carb jets are plugged, or carb seals went bad. They sell a rebuild kit for your carb, 10-15

roybi bc 30 trimmer carb problems mine would not stay running so i cleaned out carb.now it idles on the a choke setting but will not on the b and c setting.evrything is tight,right gas&oil ...

weedeater carburator setting on bolens 31cc weedeater will not run what is carburator setting initial setting is 1and1/4 turns out for walbro carb. 1 turn out zama carb.

set idle 224L set idle Standard carb settings on the Walbro carb are 2&1/4 turns out anticlockwise from fully wound in on bith H and L tuning screws.

...Edger Pops while running Hello, I have craftsman edger with a 3.8HP Tecumseh. I have rebuilt the carb, changed gaskets on noth sides of manifolds, and cleaned off flywheel pickups and coil, then ...

...of season and use stabilizer but now the car will need to be cleaned you can do it yourself with carb cleaner that carb off and remove both covers spray real good hope it works if not new carb ...

settings don't always work well in the locale the machine is sold in.This is POSSIBLY one of your problems.Higher end trimmer manufacturers set up their machines (eg. Stihl, Echo, Kawasaki, Husqvarna)

I have a Homelite trimmer fitted with a Zama carburettor.The priming action is not operating. i have cleaned the fuel lines. I have replaced the primer. All the diaphrams seem ok.. Where is the ...

...carb to standard settings.*Unscrew the H tuning screw 3/4 of a full turn.*Unscrew the L tuning screw 1 full turn.This should be the standard settings. Start saw as normal and see if its any better. ...