Precor 9.21 Treadmill "mode 1" Questions

...Mode: 1.the STOP button while inserting the safety key tPress and hold o enter the user information mode. 2.Look in the Calories window. When Demo Mode is active, the letter 'd' will appear. 3.Press ...

...1 to switch from the Demo Mode:Press and hold the STOP button while inserting the safety key to enter the userinformation mode.Press and hold the STOP button while inserting the safety key to enter ...

1. Determine mileage. A. While in Dormant Mode enter Test Mode by pressing and holding the Heart Rate and Level keys simultaneously for five seconds. B. Press the Dist key. DIST appears on the display

...MODE. 1. Turn off the treadmill. 2. Press FAST and START simultaneously and release both buttons once the display lights up. 3. Hold the fast button until the display reads 99. Short in capacitor, ...

1 ENTER ENGINEERING MODE • With the SAFETY KEY in place, hold the “ELEVATION UP” and “SPEED DOWN” buttons for 5 seconds. “DGA3” will appear in the profile window and “EHG1” will appear in the function

I have a Procor 9.1 treadmill and I turn the switch on and top display lights do not light up. Is this a switch problem or other? Step 1:1) test the fuse see the block diagram 2) replace the old ...

...1 - 5 to convert to miles per hour. * If you are in kilometers per hour mode, you will see a "Si" in the time section when the safety tether is inserted. * If you are in the miles per hour mode, you ...

...Mode 1. Enter the testing mode after switching the treadmill POWER ON by pushing first ?SELECT? and then?SPEED DOWN? and hold buttons pressed simultaneously 2. LED scanning mode for verifying display ...

...mode. will not do anything else. 1) IF THE MACHINE ONLY RUN IN DEMO MODE, TRY TO RUN IN NORMAL POSITION.2)PUSH AND HOLD ON THE STOP BUTTON BY 5 SECONDS.3) IF THE PROBLEM PERSIST, TRY TO TIGHT THE ...