Precor 9.21 Treadmill "unrolling wire" Questions

Pro Form 375 e will not start hi try looking at the front bottom of the treadmill for a trip switch. turn that in the on position. also if you are using an exention lead make sure all the wire is ...

My treadmill shorts out after I've been running on it for more than 30 minutes. Any suggestions? hi, if you are using an extention wire make sure that it is all unrolled. another thing you can try is ...

The circuit breaker trips when i get over about 3.5 mph. Not sure if it is the drive motor, belt adjustment or circuit breaker . . Craig hi, firstly if you are using a extention wire unroll the whole ...

shuts down after running a few minutes hi when you mean shuts down it that the power or just the belt, if everything including the power turns off then check the trip switch on the front of your ...

I have a Weslo Cadence M5 treadmill. When i used it, it tended to trip out the electrics when the treadmill was started, but worked when I put the trip switch back up again and tried again. However, ...

hello! have a welso cadence m5 treadmill have a fault when starting it.belt tries to move then blows plug fuse.or trips house electrics any info would be appreciated kind regards l.harris hi, firstly ...

treadmill will run for about 3-6 minutes then will snap the home circuit breaker??? HI, are you using an extention wire, if you are then please unroll the whole wire, another thing is you can try to ...