Precor 9.21 Treadmill "motor stops stand" Questions

...starts up and run but when i stand on it the belt stop rolling but the motor is still going check tension on w/belt and motor belt signs of worn out belt. black dust cracking treads or

...need to be aware that the drive belt can also cause this problem so I suggest that you remove the motor shroud and when you are adjusting whether the front roller is moving and the running belt has ...

stand on the treadmill and stop to belt and front drive wheel from spinning - so my assumption is the drive belt If the front roller is stopping with the walking belt, it is the drive belt. You may be

...stops moving Unplug unit remove motor shroud so you can see the drive belt, plug in unit then start it you will be able to see whether the drive belt or running is actually causing the problem.If it ...

motor has either slipped off, or you just need to tighten it. best way to find out is to take off the front pannel showing the motor. then stand on the treadmill. start it and you will see the problem

stops LUBE inmediately the deck belt, this happen because lack of maintenance, shut down occur.,maybe your have deck worn.2= rollers bearing lube too3=measure the input voltage motor, if there are the

...motor run when not standing on it but when you stand on it, it stops working. It was moved yesterday and worked fine before that. I recently had the same problem.  You need to remove the left ...

...stops pro-form cs7e try standing on it then starting it, some units have a saftey curcuit that cuts th motor if there is a spike in service Voltage level this how the machine detects if you have ...

Got wet and blew Treadmill standing outside running pad near motor got wet machine was switched on huge puff from machine and it stopped working Replace your controller

...manual   2) The noise can be the bearing from rollers  3) Bearing from main motor 4) or elevation motor bearing. sincerely. God bless you.ernesto ...