Leak in my brake lines...need brake line diagram

Question edited for clarity. Wrong type of Brake - Break. Easy way to remember 'brAke' = Automobile.

They leak because they exposed to water and salt and they rust.

2006-08 Buick Lucerne 3.9L V6 4.6L V8 Complete Brake ...

https://www.inlinetube.com > products > sblb0601

This preformed complete brake line kit will replace all the metal brake lines on your vehicle and includes the master cylinder lines, left front line and right ...
US$251.00 · ‎In stock

https://www.google.com/search?q=2006+Buick+Lucerne+brake+lines

..

contact a local mechanic

Yours will be similar to this one......................


20 Awesome brake line diagram 2000 silverado images

Hey guys looking at that diagram, just below the Line #1 on this side there is a fitting installed into the block, actually three of them but the one closest to us looking at the diagram is leaking on my 99 Ford Lightning. Any ideas why or how to fix it?

Follow the brake line starting at the left rear wheel, there is no diagram for brake lines, take the tire off and inspect (look) left rear wheel, It will be wet where the leak is, if the inside of the tire is wet then you might want to check the brake cylinder, behind the brake drum. You might want to take it to a shop and get it fixed, It is your life and others, if you can't stop.

Chilton won't offer a diagram because there are many line length combinations which can be used to repair this problem.

Often, technicians reroute the lines around the axle nearby the old line and secure it using plastic cable ties that can be bought at your local dollar store or Walmart.

There is a great deal of flexibility in putting a new line in, as long as it doesn't interfere with other moving parts of the suspension.

It's a rear brake tee. Nothing but drilled brass. Might want to try checking the threads and flares on the brake lines that go into the tee. It's not often they crack and leak so inspect well. Let me know.

They don't make diagrams for brake lines. The lines are sold in bulk. You need to measure and duplicate the bends in the orignal lines and cut/flare the lines yourself. You will need a tubing cutter, flare tool and tubing bender.

no you can cut and reroute the line ive done it in the past many times. just remember more line means more fluid so after you bleed it check the level again after a week or so.

brake problem in 1996 ord taurus