Need the torque setings for a 6cl ford truck head bolts and conrod bearings can you please help me

Here is the cylinder hear torque search query. Change for each part and press Enter.

https://www.google.com/search?q=2005+ford+ranger+2.5+cylinder+head+bolt+torque+settings

https://www.google.com/search?q=2005+ford+ranger+2.5+main+bearing+bolt+torque+settings

https://www.google.com/search?q=2005+ford+ranger+2.5+con+rod+bearing+bolt+torque+settings

or the manual

https://barringtondieselclub.co.za/ford/ford-ranger-2.5-he-4-cyl-engine.html

..

i uses this

https://eautorepair.net/Marketing/Default.asp

Cylinder head

https://www.fixya.com/cars/t24149916-qr20de_cylinder_head_tightening_sequence

Page 96 for Nissan QR25DE

https://www.mahle-aftermarket.com/media/local-media-north-america/pdfs-&-thumbnails/torque3.pdf

https://www.google.com/search?q=2003+Nissan+Liberty+QR20+diesel%2C+bolt+torque+settings

...

I have a manual that will help you.

http://www.championbrands.com/aera-torquespecs.pdf

https://www.google.com/search?q=cylinder+head+bolts+torque+settings+for+2005+polo+classic+1400&biw=1360&bih=650&tbm=isch&tbo=u&source=univ&sa=X&ved=0ahUKEwjGlr6_hKTQAhVFYyYKHW29CwgQsAQIGg#tbm=isch&q=Conrod+bearing+torque+golf+tci+1.4+16v+2009

Hope this helps

Main Bearings: 103nm
Conrod bearings: 64nm
Cyl Head: 44nm +90? +90? - USE NEW BOLTS

Cylinder head bolt torque sequence
The Rod Bearing Cap Torque
The Main Bearing Cap Torque 38 Foot pounds (Final torque)


Step 1: Torque 10-12 Ft/LbsStep 2: Torque 17-21 Ft/Lbs


Note :
Torque sequence ------------------------
' 11 '
front ' 13 9 3 1 6 8 '
of ' '
engine ' 14 7 5 2 4 10 '
' 12 15 '
------------------------
Step 1: Torque all bolts in sequence 22 Ft/Lbs
Step 2: Torque all bolts in sequence 47 Ft/Lbs
Step 3: Loosen all bolts in reverse sequence
Step 4: Retorque all bolts in sequence 22 Ft/Lbs
Step 5: Retorque all bolts in sequence 43-51 Ft/Lbs
Step 6: Retorque bolts 11 thru 15 in sequence an
additional 4-6 Ft/Lbs
** CAUTION ** This engine uses 2 different length head
bolts. "#1" Is the long bolt, while remaining bolts
are short. **Do not confuse location of these bolts**
recheck final torque in sequence

Head bolt torque: 90-100 ft lbs., to be reached in 3 equal tightening steps, below is the sequence:
9 3 1 6 8
Front of vehicle
7 5 2 4 10

Main bearing cap torque: 75-85 ft lbs.
Rod bearing cap torque: 45-55 ft lbs.
Looks like u've been busy, and will be for a while. Good Luck!

Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees