2003 Ford Mustang Logo

Related Topics:

Anonymous Posted on Jun 08, 2017

Werid pulls when i let go of gas on 03 mustang v6

When i hit around at least more than 40mph on my mustang 03 V6 it switches gears all fine but once i let go of the gas it makes some weird pulls that feels like it wants to downshift or turn off but i feel it more when it goes into the overdrive mode than u can really feel those pulls....o its just not one pull its a couple and also if i do let go of the gas my rpms go a lot faster down than before which i cant just let my car cruise by letting go of the gas.....plz help

5 Related Answers

junmag

Jun Magno

  • 175 Answers
  • Posted on Jun 02, 2009

SOURCE: my vortec 350 sierra is shifting weird

try removing the chip first and see what happens

Ad

Anonymous

  • 17 Answers
  • Posted on Jun 12, 2009

SOURCE: 2002 mustang makes rattling sound when accelerating...

Possible bad motor mount(s) --only thumps or rattles when power is going to the wheels.

Jonah Oneal

  • 14092 Answers
  • Posted on Aug 27, 2009

SOURCE: My 1996 Ranger 2.3 sputters at mid RPM's. driving

REPLACE FUEL FILTER.SOUND LIKE ITS ALMOST STOPPED UP.

kel1guy2002

Kelly

  • 3740 Answers
  • Posted on Feb 16, 2010

SOURCE: i own a 1995 mustang

An engine light that comes on when the engine rpm is high can be a few things.

1. o2 sensor on the exhaust manifold (doubt it)

2. Engine oil is near the add line..... Or need to use a higher viscosity oil 40W (possible)

3. EGR valve seat is loaded with carbon and is blowing by when it should be closed causing the o2 sensor to detect and emissions problem. (possible)

4. A simple vacuum leak some where on the engine or inside the power assist module of the brake master cyl. . (possible)

5. A dirty Air Filter

Hope this gives you and idea of where to start looking..

Thanks for using FixYa!

Kelly

Anonymous

  • 4669 Answers
  • Posted on Mar 28, 2010

SOURCE: I have a 98 Ford Mustang v6 3.6 liter engine. I

Are you getting a check engine light?

Testimonial: "I didn't think to check that. I have some cleaner for that. I will try to clean it out and have it checked. Hopefully that is the problem. thanks :)"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

1998 Ford Mustang V6 automatic. When hitting a bump the radio turns off and car goes into neutral for a few seconds?

Bad wiring connection somewhere. Finding it is the problem, because it could be anywhere. Look underneath for scuffed connectors.

https://www.google.com/search?q=1998+Ford+Mustang+V6+automatic.+When+hitting+a+bump+the+radio+turns+off

..
0helpful
1answer

95 mustang v6 auto no forward gears but works in reverse had ****** rebuilt and same thing

Maybe your differential is shot and will only allow reverse spin or the transmission was not really rebuilt professionally. Was the transmission checked outside of your car after rebuild? Does your vehicle have a Powertrain Control Module (PCM)? Maybe the module went bad or faulty.
0helpful
1answer

Mustang drop down windows to clear roof moulding don't work. any suggestions?

i have a 2004 mustang v6, my windows do not drop when you pull the handle to open the door, and they clear the top just fine. i don't know where you hear they do, i would like to know.
0helpful
2answers

I have a 2000 ford mustang with a 3.8l v6. Well I know it had been sitting for a while. But anyways when I go to start it, it will try forever to start if I tap the gas while turning the key it will start...

yes your plug wires are bad. this sounds like a fuel system problem (ie plugged filter, flat injector weak pump) a good tune up will take care of it all. the Ford dealer will have all the correct factory parts as well as ford trained technicians to do the job right. also in today's market place you would be surprised how competitively priced they are.
0helpful
1answer

Get car past 115mph marker....mustang 03' v6

Ford,s stock computer shuts off the fuel at 113 mph, call summit racing and get a chip it stops the rev limiter
0helpful
1answer

03 honda accord v6 shifting problems

Sounds like it could be the ECU (electronic control unit); easy to change. I have bought used ones a lot cheaper than new ones and work fine. Your year may be located under the glove box to the right behind panel (my older car was passenger side under the mat). They are easy to change out regardless of location.
1helpful
1answer

98 mustang v6 starts fine but when put in gear it stalls out ???

Change fuel filters. You may have to drain and clean the gas tank. Over a period of time, debris accumulates in the bottom of gas tanks. As long as the car in not moving, the debris sits in the tank. Once the car starts moving, the debris gets sucked up along with the fuel.
0helpful
1answer

I have a 2000 v6 mustang 5spd. The trans,

Replace universal joints in driveshaft.
0helpful
1answer

First my daytime running lights would flicker and I could pull the light switch once and it would stop and now I have to pull the switch all the way on...I have a 2000 ford mustang v6

your switch is bad. had same problem on my 1970 mustang with the headlights flickering unless I pulled on the switch. I replaced the switch and they work fine now.
1helpful
1answer

How do I remove the "T" handle shifter?

it just pulls off, but they can be stubborn, have hit my head on roof more than once in the 25 years i worked for a Ford dealer..
Not finding what you are looking for?

66 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...