SOURCE: car alarm preventing car from starting
1999 CONCORDE: check the battery terminals probably they are not tight enough...something like that happened to me just the lights turned on and the car seemed to be dead, the battery is still ok since then. I just needed to buy new terminals.
SOURCE: Anti-theft system stuck triggered
Doing roadside assistance I have ran into this problem several times and if you look in your owners manual it will tell you how to reset it. Some of the cars you have to wait up to 10 min. with the key in the ignition and try again. The light will go out. READ carefully our owners manual.
Hope this helped....Kevin
SOURCE: 1997 ES 300 How to reset anti-theft system when car won't start
With the doors shut, insert the key into the drivers door lock. Lock and unlock the door 5 times. This should reset the system. If that doesn't work you should contact a qualified repair shop.
SOURCE: chrysler anti theft system 2000 300m
Sounds like the tumblers were messed up. The key shouldn't come out while the ignition is on. If I am right, this has one of those very expensive "Chip" keys? Buying a new key could be more expensive then a lock cylinder. It will probably be cheaper to keep those keys then buy new ones on top of whatever it takes to repair the damage to the lock. You may be better off calling a "Locksmith". Even a new lock cylinder will have to be coded to something. You should be able to find a locksmith that will make a service call.
Let me know how that goes?
That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.
94 views
Usually answered in minutes!
×