SOURCE: can't find the location of the temperature sensor
it is normally up by the thermostat and try www.autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you
SOURCE: where is a knock sensor for 1998 Mercury Villager located?
Here is a image of it's location, I hope it helps.
SOURCE: where is the nork sensor on mercury villager 1999
the knock sensor is under intake, must remove intake and it is under two coolant lines
SOURCE: Code reader knock sensor where is it located
According to the Haynes manual it is under the intake manifold, Upper and lower intake manifolds must be removed for access. If you go to Auto Zone, they have the sensor and can give you the step by step instructions to replacing the knock sensor with common tools. Good luck and hope this help.
SOURCE: where is a knock sensor for 2000 mercury villager
It is under the lower intake manifold in the valley of the engine.You must remove the cross over coolant tube to gain access to the knock sensor. It bolts into the cylinder head. Good luck
Testimonial: "good help, thanks."
115 views
Usually answered in minutes!
×