20 Most Recent 2000 Mercury Villager Questions & Answers


I'm assuming it's a fuel injected engine. If so, and you can't see an in-line filter after tracing the lines, it's probably in the fuel tank. If the fuel supply, return, and vent hoses go to the top of the tank, pull the carpeting or back seat, whichever is above the tank, and look for a screw down plate. When you remove the plate, it will give you access to the housing for those items.

2000 Mercury... | Answered on May 26, 2019


its the distributor.

2000 Mercury... | Answered on Oct 03, 2018


easiest way to test the coil is to put a hose about 3-4 inches long on coil then put spark plug in other side of the hose and have a helper turn the key. look for a blue spark at the plug. if no spark then that side of the coil is bad.

2000 Mercury... | Answered on Sep 03, 2017


Try shrinking yourself until you are really, really tiny or use a mirror and flashlight to see how the mechanism works as you operate it. You may find there is a weak spring or defective latch mechanism.

2000 Mercury... | Answered on Jul 31, 2017


These EATC fault codes are commonly caused by a sticking air temperature control blend door and or the blend door actuator..

2000 Mercury... | Answered on Jun 29, 2017


Don't take chances with brake issues. All anyone here can do is guess what the problem might be. Get it to a dealer or a reputable mechanic - have it towed if you're afraid to drive it - and have it diagnosed and repaired.

2000 Mercury... | Answered on Jun 10, 2017


You will need to have the dealer program a new key.

2000 Mercury... | Answered on Jan 17, 2017


Probably by replacement. For a 2000 Villager, this is a likely junkyard find.

2000 Mercury... | Answered on Jul 14, 2016


I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

2000 Mercury... | Answered on Jun 13, 2016


Check all fuses,If switches for other doors work, test and replace driver multi switch if defective. Switch OK, you will have to check wires for damage at hinge area of door by removing protective sleeve, if wires are damage, make repairs.

2000 Mercury... | Answered on Mar 26, 2016


A burning smell is an important symptom of something VERY WRONG. Get it towed to a repair shop, and get them to trace the wiring harness.

2000 Mercury... | Answered on Aug 21, 2015


Hello
The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.

2000 Mercury... | Answered on May 26, 2015

Not finding what you are looking for?
2000 Mercury Villager Logo

385 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

gerry bissi

Level 3 Expert

4388 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

fordexpert

Level 3 Expert

5692 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Villager Mercury

  • Villager Mercury

Most Popular Question

like know coil resistance values 2000

  • Cars & Trucks
Loading...