Audi a4 quattro

SOURCE: where is the fuse box

Open the driver's door and look at the side of the dashboard (where the door mates up when it's closed). There's a funky shaped panel on the end of the dash - pull that off and the fuses are beneath it.

SOURCE: wherer is my fuse box

Open the driver's door and look at the side of the dashboard. You'll see a funky-shaped panel on there. It has a finger-pull cutout in it. That's the fusebox cover. Pull it off and you'll see your fuses.

SOURCE: 2002 audi a4 quattro 3.0 serpentine belt diagram

Hello m_hueffer, my name is JShreader. Thank you for choosing fixya.com.

Here is the diagram you requested...



I hope this helps you. If you have any more questions or need any more diagrams, please don't hesitate to ask...Thanks again, JShreader!

SOURCE: i want a user manaul for my audi a4 1.8l quattro

Here is a manual, but you have to purchase it:

http://shopping.msn.com/prices/audi-a4-service-manual-1-8l-turbo-2-8l-including-avant-and-quattro/itemid2373553/?itemtext=itemname:audi-a4-service-manual-1-8l-turbo-2-8l-including-avant-and-quattro

SOURCE: serpentine belt diagram for 1996 audi a4 quattro

Ribbed Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
CAUTION: Mark the direction of belt travel before removing, using a crayon or marker. Reinstalling a used belt in the opposite direction
could damage the belt
Note: There are two different types of ribbed belt, identified as versions A and B.
Ribbed belt versions, identifying, refer to Application and ID
Removing
Old version A
- Remove ribbed belt guard.


- Loosen ribbed belt tensioner using 15 mm wrench and drift 3204.
- Remove ribbed belt.

New version B
- Using 10 mm hex socket wrench, turn downward in direction of arrow to loosen ribbed belt.
Installing
Install in reverse order of removal, noting the following:
- Place ribbed belt over drive pulleys and idler roller first, and onto tensioning roller last.
- Remove drift 3204.
- Install ribbed belt guard.