Car starts but doesnt stay on and if it does the needle will go down then race up then shuts down
SOURCE: chrysler 3.3 vin r v6 mini van, starts then dies
Charlie. You have replaced the ECM on your van?.
Kedwin,, Your problem is, the computer on that 3.3 L.
Need to be programed with the VIN nember of your car.
The Antitheft System will disable the injectors due a incorrect VIN, Bucause the body computer is not recieve the correct pasword between 5 seconds after start up.
YOU have 2 options. 1 get a ALOHA Smith. some of they have the computer required to program ECMs.
The other option is: Get a new ECM from the dealer, They will program if ask for that.
NOTE:::::: Other way is . Put the body control module with the computer from the same car.
OK... I hope this work for yours.
If NOT letme know I can look for more information.
Thank you.
That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.
SOURCE: chrysler wont start
Sounds like a short maybe. maybe the wire completely broke? if you know a technician, see if the fuel pump is even getting power when key is on
SOURCE: chrysler 300m wont start changed
What prompted you to change the fuel pump to begin with? Did you check the codes on the dash? Or have someone OBD check it? It could be a crank sensor, but the codes should reveal that. Codes first and work backwards, please.
SOURCE: Where is fuel pump on 99 Chrysler Concorde lxi 3.2?
Inside the fuel tank
Have to drop or remove the tank
The pump comes out the top
221 views
Usually answered in minutes!
×