Radio, dome light, locks, brake lights and trunk does not work after replacing battery and altenator in a sebring 2004

SOURCE: my sun visor broke on

check your relay box definatly and how exactly did your friend remobe it? were there screws involved if so. your wiring got messed up and needs fixed. this will entail pulling out panels and running new wires. good luck!

SOURCE: I HAVE A 2005 CHRYSLER SEBRING AND DOME LIGHT,RADIO ALL POWER LOCKS HAVE QUIT WORKING

me too! - looking at fuse #5 red 10 Amp one but has black thing on it.

Can't get if off..

Have read the manual is wrong and to use panel on side of fuse box for fuse locations...

SOURCE: had windshield replaced now radio power locks and

Was the original windscreen a heated windscreen?? If so, has the wire that feeds this been trapped causing a short which is blowing a fuse which also feeds the dead items?? Maybe theres an inline fuse for these items located in the kick panel. If it was fitted professionally, I`d have a word with them, they should sort it out, they caused the problem, not you. Ian

SOURCE: My 2004 chrysler sebring electical is not working.

Check around the MAP sensor area for any connections that may have been disturbed while you were replacing the sensor. Most or all of those functions are controlled by the body control module. I would think that a fault like that would show on the scanner readouts.