Question about 1998 Chrysler Town & Country

1 Answer

Transmission seems to come out of gear when breaking/stopped

I have a 98 Chyrsler Town & Country that has just decided to adapt this unusual problem. While breaking or when I come to a complete stop, when I go to accelerate, the engine just revs like it is in nuetral. I've tried shifting into different gears, restarting the car, nothing seems to help. It just desides when it wants to work again. If someone out there can help me that would be great. Thanks, Joe.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 359 Answers

It sounds like your transmission is overheating, you may want to check fluid, and get the tranny flushed, and get the trans filter changed. Hope it works out.

Posted on Mar 03, 2009

  • Alan Conner
    Alan Conner Mar 03, 2009

    It sounds like your transmission is overheating, you may want to check fluid, and get the tranny flushed, and get the trans filter changed. Hope it works out.

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I find and test ther fan control on a 2010 chyrsler town and country


ARE YOU REFERING TO THE RADIATOR COOLING FAN OR THE A/C BLOWER MOTOR ?

Jan 20, 2015 | 2010 Chrysler Town and Country

1 Answer

2001 chyrsler town an country code 1684 0135 what do this mean an can i still drive with this on


P1684 means the battery was disconnected in last 50 engine start/stop cycles, did you disconnect the battery?
P0135 indicates the heater circuit of the before catalyst O2 sensor has failed.

Mar 24, 2014 | 2001 Chrysler Town & Country

1 Answer

2001 chyrsler town and country error code P0755


The P0755 means Shift Solenoid "B", hope this can help you!
_____________
AK500 key programmer

Nov 02, 2012 | 2001 Chrysler Town & Country

1 Answer

I have a 98 town and country when the transmission gets hot it stops pulling


check the transmission fluid may be low it may need to be serviced

Nov 17, 2011 | 1998 Chrysler Town & Country

1 Answer

Tight rope sound when turning my chyrsler town and country


it could be an upper strut bearing worn out or a broken coil spring making this noise.

Apr 25, 2011 | 2005 Chrysler Town & Country

1 Answer

Is there any connection between the 2008 Chyrsler Town & Country HVAC drain grommet recall that is leaking water and a leak in the HVAC hose?


Yes there is a connection, The recall # is K25, it is for replacement of the HVAC grommet, and HVAC Drain tube to prevent a leak onto the airbag control module and connector.

Jan 23, 2011 | 2008 Chrysler Town & Country

1 Answer

My 1999 chyrsler town and country mini van 3.3 lt engine is having problems. This Morning my speedometer quit working and my car is not shifting gears. It wont switch gears properely and the service engine...


The output speed sensor may have come unplugged or got damaged. It is at the front of trans close to the drivers side tire. If you lay on the ground in front of the tire you should be able to see it.

Jan 20, 2011 | 1999 Chrysler Town & Country

2 Answers

Can the


Go to your local auto parts dealer. Most of them will read your codes and give you the meaning of them. Auto Zone is one that always provides this service for free and lots of others do too.

Mar 26, 2010 | 2001 Chrysler Town & Country

1 Answer

Fix a 1998 town and country van


hi i had the problem it was the circut board solder,in the dash cluster

Oct 03, 2008 | 1998 Chrysler Town & Country

Not finding what you are looking for?
1998 Chrysler Town & Country Logo

137 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...