How to replace 91 oldsmobile cutlass ciera serpentine belt

SOURCE: The windows in the 95 oldsmobile cutlass ciera won't work at all

maybe the wire is severed where the door (drver dr) pivots. thats what was wrong with mine. there is a rubber boot with crinkles in it that hold all the wires together. you can also try replacing the switch board that controls the wndws on the drvr dr. hope that helps.

SOURCE: serpentine belt diagram for 1989 olds cutlass ciera. 2.5 engine-4 cyc.

http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=OLDSMOBILE&model=CUTLASS%20CIERA&year=1989&year_from=&year_to=&engine=All&l=n

This should Help. Please Rate My Response! Thanks!

SOURCE: Changing spark plugs on a 1995 Oldsmobile Cutlass Ciera

ALL YOU NEED IS 3/8 RATCHET WITH A 5/8 SPARK PLUG SOCKET.YOU NEED EXTENSIONS AND UNIVERSAL JOINTS TO GET TO HARD TO REACH PLACES.YOU NEED A SPARK PLUG GAUGE.YOUR SPARK PLUG GAP SETTING WILL BE. 0.060 THAT WILL BE FOR THE 2.2 AND 3.1 ENGINES.

Testimonial: "Thank you very much for your advice and time!"

SOURCE: how to replace serpentine belt diagram 1997 olds cutlass

Have you checked under the hood, should be a belt diagram some were around the fan shroud .

SOURCE: replace serpentine belt 1998 olds cutlass

Here's a link to a series of videos that will explain how to change the serpentine belt.

http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

Here is a diagram of the belt routing which will help you put the belt back on correctly...