Below is the master help link provided to go through belt routing diagram:---Timing belt,drive belt,serpentine belt,accessory belt,fan belt,engine belt routing diagrams for all types of car models?
Click the link below :----http://carbeltrouting.blogspot.in/2012/02/timing-beltdrive-beltserpentine.html
----------This will help.Thanks.
SOURCE: serpentine belt replacement
2.0L Engines
See Figures 11, 12 and 13
The
accessory drive belt for 2.0L engines has no provision for manual belt
adjustment, since these engines use an automatic belt tensioner. Drive
belt slack is taken up by the automatic tensioner.
Movement of
the automatic tensioner assembly during engine operation is not a sign
of a malfunctioning tensioner. This movement is the tensioner
self-adjusting and is required to maintain constant belt tension.
The belt tensioner has a belt length indicator. If the indicator marks are not between the MIN and MAX marks, the belt must be replaced.
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
SOURCE: belt routing diagram 98 zx2 2.0
1) Start with the alternator.
2) Forward to the smooth idler
3) Forward to power steering
4) Down to A/C compressor
5) Back to crank pulley
6) Forward around tensioner
7) Back glancing off of water pump
8) Back glancing off of ribbed idler
9) Up around alternator (where you started)
Good luck!
SOURCE: routing of serpentine belt for ford escort zx2
Click on the link below, Enter the year,make,model, and engine. You will get a page with a link to the diagram you need under the part number.
Greg
http://www.mvreader.com/multiview/dayco/index.php?autoCatalogSearch=0&catalog=auto&l=n&year=2000&year_from=&year_to=&make=FORD
SOURCE: needa serpentine belt routing diagram for a 1990
You didn't specify the engine in your pickup. Ford put at least 5 different engines in thier 1990 pickups. You might check here to see if your engine is listed, then click on "belt routing diagram" for your particular engine and configuration.
Testimonial: "Thank you very much for your help. It was greatly appreciated."
SOURCE: ford f 150 serpentine belt routing diagram
CLICK on the following LINK. It has all the Diagrams for your Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Thanks!
http://www.2carpros.com/car_repair_information/year/1997/make/ford/model/f-super_duty/1997_ford_f-super_duty_drive_belt_routing_diagram.htm
Fig. Accessory serpentine belt routing-6.5L Diesel engines
Fig. Accessory serpentine belt routing-6.6L Diesel engines
Hope this helps (remember to rate this answer).
Next, follow this link and watch the video that shows you how to replace a serpentine belt...
Fig. Serpentine accessory drive belt routing-3.0L (VIN U) engine
Fig. Serpentine accessory drive belt routing-3.0L (VIN S) engine
Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN U) engines
Fig. Serpentine accessory drive belt routing-Ford 3.0L (VIN S) engine
Fig. Serpentine accessory drive belt routing-Ford 3.4L SHO engine
Fig. Water pump drive belt routing-Ford 3.4L SHO engine
Fig. 11: Drive belt routing-2.0L SOHC engine with A/C
Fig. 12: Drive belt routing-2.0L SOHC engine without A/C
Fig. 13: Drive belt routing-2.0L DOHC engine
1,917 views
Usually answered in minutes!
×