I got a ford fosca 2006 got codes p0001,p0089,p0190,p0490,p0489.p1632,p2135,p0606. what does all thes mean

Question edited for clarity.
Question moved to model category.

The P0606 fault code means that there's an error with your power control module (PCM). Your PCM is the computer inside your car that monitors all the vital systems. Basically, it's the brain of your car. Every time you start the car, the PCM runs a series of checks to make sure everything is okay.

How to Fix the P0606 Fault Code - Solo Auto Electronics

What the P0303 code means. The P0303 DTC is set when the ECU detects multiple misfires from cylinder 3. Misfires cause the ECU to set the Check Engine Light and put the vehicle into a failsafe mode to prevent damage. The Check Engine Light will remain until the code is repaired.

P0303 OBD-II Trouble Code: Cylinder 3 Misfire Detected

Your $7E8 and the $7E9 are fuel/ air intake codes, as for the P1326 Ok, this code is set when the knock sensor detects vibrations from engine rod knock, however, it may be set falsely due to incorrect knock sensor logic programming in the engine control module.

Codes $7E8, $7E9 and P1326? - CarGurus.ca

P0606
The P0606 fault code means that there's an error with your power control module (PCM). Your PCM is the computer inside your car that monitors all the vital systems. Basically, it's the brain of your car. Every time you start the car, the PCM runs a series of checks to make sure everything is okay.

How to Fix the P0606 Fault Code - Solo Auto Electronics

https://www.solopcms.com > blog > fix-p0606-fault-code

P0606 - Meaning, Causes, Symptoms, & Fixes - FIXD

https://www.fixdapp.com > blog > p0606-code
6 days ago - Code P0606 is triggered when there is a fault found in the processor internal to the Engine Control Module (ECM)/Powertrain Control Module ...

P0606 - OBD-II Trouble Code - RepairPal

https://repairpal.com > obd-ii-code-p0606
When the code P0606 is set in the Powertrain Computer, it means that the Powertrain Computer or PCM is failing its own self-check and has found problems with ...

P0606 OBD-II Trouble Code: PCM Processor Fault

https://www.yourmechanic.com > Articles
P0606 code definition PCM Processor Fault What the P0606 code means The Powertrain Control Module is sometimes referred to as the Power Control Module, ...

You have to fix the issue first, and then you clear the code using and OBD11 scanner.

P0629 means there is an issue with the "A" control circuit in the fuel pump often due too bad connectors/wires or a defective CAN bus

P0627 - Fuel Pump 'A' Control Circuit/Open

Possible causes

- Faulty Fuel Pump
- Fuel pump harness is open or shorted
- Fuel pump circuit poor electrical connection
- Faulty Fuel Pump Relay
- Faulty fuel pump control module (if applicable)

P0606 OBD-II Trouble Code: PCM Processor Fault

What the P0606 code means

The Powertrain Control Module is sometimes referred to as the Power Control Module, or the Engine Control Module (ECM); all of these names mean the same thing. The PCM is responsible for monitoring every aspect of the vehicle's engine and electrical system.

When the vehicle is started up, the PCM will perform a self-check to make sure that all of the engine's components are operating properly. If the result of this self-check indicates that there is a processor fault in the the PCM, it will store the P0606 diagnostic trouble code.

What causes the P0606 code?
•PCM wires that are broken, corroded, and/or frayed
•PCM connectors that are broken, corroded, and/or frayed
•Faulty PCM ground circuits and/or output devices
•Faulty Controller Area Network (CAN) bus communication

https://www.google.com/search?q=code+p0606+on+a+kubota+mx5200&rlz=1C1QJDB_enCA643CA644&oq=code+p0606+on+a+kubota+mx5200

..

P0606 , P0607 ! no such codes P06006 or P06007
DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610
DTC P0606 Control Module Internal Performance
The DTC P0606 and P2610 set when the powertrain control module (PCM) has determined that the control module has an internal fault. The PCM performs continuous self checks of all internal circuits. There are 2 central processing units (CPU) within the control module. If the outputs from the two CPUs deviates from the standard level, a DTC P0606 sets. The control module has several internal clock or timer circuits. The DTC P2610 diagnostic monitors the internal timer circuit responsible for the ignition OFF operation of the evaporative emission (EVAP) system vacuum leak pump. If the there is an error in the control module timer, a DTC P2610 sets.

P0001 Fuel Volume Regulator Control Circuit/Open
However, this may not actually be correct on your vehicle, as seemingly error code P0001 is not used by many manufacturer's.. it's a 'generic' code.

Here's a couple of links that may be of help:

kia P0001 OBD DLC Error Code Fuel Volume Regulator Control Circuit Open

http://www.obd-codes.com/p0001

no it will not ,it may blow the big ends but it will not throw any code ,this code you quoted does not exist in my ford code list but on the universal OBDII


P0190 Fuel Rail Pressure Sensor Circuit Malfunction

could be a loose sensor?? or a dirty connection on the plug?

TSB 7/2006
Subject/Concern: Hesitations; Poor or no start; Deteriorated fuel economy; Diagnostic trouble codes (DTC) P1412, P0490 and P1335 stored
Model: Focus C-MAX 2003.75 (06/2003?¿½) Build Date: 14.02.2004-01.03.2006
Build Code: 4R-6S
Assembly Plant: Saarlouis
Engine: 2.0L Duratorq-TDCi (DW) Diesel
Focus 2004.75 (07/2004?¿½) Build Date: Up to 01.03.2006
Build Code: Up to 6S
Assembly Plant: Saarlouis
Assembly Plant: Valencia
Engine: 2.0L Duratorq-TDCi (DW) Diesel
Markets: All
Section: 303-08
Summary


Should a customer express concern about one of the following:


* hesitations,
* poor or no start,
* deteriorated fuel economy,
and upon investigation diagnostic trouble codes (DTC) P1412, P0490 and P1335 are stored in the powertrain control module (PCM), the probable cause is a sticky exhaust gas recirculation (EGR) valve.


To rectify this concern, a new EGR valve with a stronger EGR valve motor and revised PCM calibration should be installed.

p0606 is a generic code for a prob with the powertrain controle module and/or a power supply issue the p2 codes are for body codes check the the pcm for water ingress and corroded connectors

Follow this link, hope it helps. Good Luck.
http://www.fordf150.net/forums/viewtopic.php?t=49449

Start with the first code first. The P0606 code essentially means the PCM has failed - more info @ http://www.obd-codes.com/p0606