20 Most Recent 1983 Peugeot 504 Questions & Answers

Hi I know this is years later, but removing the thermostat is not advisable. If the car heats up in the summer have your radiator taken apart and the core cleaned by a professional radiator place. The 504's core tend to get blocked over time. it might also be a good idea to try and get a more heavy duty core or make fit a bigger radiator. Always have coolant in your system other wise the water will eat your cylinder head. It also prevents the radiator from getting clogged up.

1983 Peugeot 504 | Answered on Jan 03, 2015

We have no way to look this up. Please contact a local parts store.

1983 Peugeot 504 | Answered on Sep 28, 2012

well i have never done it myself. but its going to be alot of hassle.
its not the same as sticking a turbo on a petrol

1 you need a manifold which will suit it
2 for best results you need an exhaust to match
3 you will need to replace the fuel pump. to match the size of your engine (preffrably take the turbo and the fuelpump from the turbo version.
4just as well stick a new timing belt on while the fuel pump is off
then you need to tap into the oil as turbos need a constant oil feed. and that might require drilling and tapping into the block.

this is only an educated guess but im sure its pretty standard in fitting a turbo to a non turbo viehical.

1983 Peugeot 504 | Answered on Dec 09, 2011

it may be the back light bulbs that need replacing. to check for this simply shine a torch on to the display and you should be able to see the read out.

let me know if this helps

cheers big mike

1983 Peugeot 504 | Answered on Jun 11, 2011

camshaft sensor /crankshaft sensor./

1983 Peugeot 504 | Answered on Mar 09, 2011

You might want to check if that engine is an interferance engine first. Most of the car diesels in that era were interferance engine meaning if they jump time or belt breaks, it usually wipes out the valves as they hit the pistons until the crank stops turning.

1983 Peugeot 504 | Answered on Mar 08, 2011

you may have a blown fuse or the temperature sensor that activates the fan may be faulty or you might have a bad connection, check all your wiring.....hope this helps......cheers

1983 Peugeot 504 | Answered on Jul 08, 2010

You need a new wheel. Your continued use of this damaged wheel is not only inconvenient (you must continue to blow up the tire) but also dangerous. Your tire was probably damaged when you hit the pot hole and could suddenly fail at any time. Your wheel is now also out of balance and can cause other mechanical troubles with your 27 year old car.

Thank you for your interest in FixYa.com

1983 Peugeot 504 | Answered on Mar 02, 2010

what is the problem??

1983 Peugeot 504 | Answered on Jan 26, 2010

a 1983 peugeot ?? you having a laugh ,its over 25yrs old and the parts are not available unless you buy some rolls of wire ,and renew and make your loom

1983 Peugeot 504 | Answered on Dec 23, 2009

the stop solenoid is located on top of the injection pump ind will either have a single wire going to it or a bunch of wires going to it. if it has a bunch of wires going to it then it is part of the pump (very expensive)
if it is just a single wire they are quite cheep to replace.
if it is a petrol then he is probably refering to the fuel cut off switch located on the right inner wing under the bonnet, this is a black unit with a red cap.

1983 Peugeot 504 | Answered on Dec 17, 2009

I'm assuming you mean inside of your air cleaner you either need to clean air cleaner housing replace air filter and PCV valve and or PCV breather filter hose, PCV system or your engine has excessive blowby and is worn internally.

1983 Peugeot 504 | Answered on Oct 17, 2009

Ok, you can access it but i wouldn`t reccomend it. Pop it out with a screwdriver, there is a bit of clearence at the bottom of the multi function display pop it upwards. Truthfully i would see an auto electrician he or she will prob sort something like this for around £30. My guess is the two the 2 t5w wedge bulbs are loose that light it, or as you say bad wiring,causing it to fail occasionally Good luck.

1983 Peugeot 504 | Answered on Aug 20, 2009

...the easy ways are...change the shock absorbers to hard with gas filled not oiled filled...change the tires to 185 x 60 x 15" change and lowering the spring...if you can then add front, sides spoilers and wing spoiler...

1983 Peugeot 504 | Answered on Jul 11, 2009

Not finding what you are looking for?
Cars & Trucks Logo

35 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers


Level 3 Expert

85206 Answers


Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

504 Peugeot

  • 504 Peugeot

Most Popular Question

describe 1983 phelo peugeot 504 model

  • Cars & Trucks