Top 20 1997 Ford Expedition Questions & Answers

Question edited for clarity and funky Caps useage, made sentences and stuff :>D Question moved to year model category. .. Video help is the best help.

Question edited for clarity. Question moved to model category. There are two manifolds, Inlet Manifold and Exhaust Manifold. If it is leaking, it is likely to be the Inlet manifold and a connection to it. Add the right word to this link and there will be a video that shows it. https://www.google.com/search?q=1997+ford+expedition+replace+manifold+gasket Vacuum Line Diagram https://www.google.com/search?q=1997+ford+expedition+vacuum+line+diagram ..

Question edited into proper written English from Text Speak. Question moved to model category. You have a computer electronics issue and the only way to diagnose the the gauges problem and the battery draining issue is by an auto electrician with a pro grade scan tool computer. https://www.google.com/search?q=mobile+auto+electrician+near+me ..

Question edited for clarity. Question moved to model category. It depends. If the key turns and doesn't start, you may be able to reset the security system.

1. Insert the key into the driver's side door lock.
2. Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
3. Do this again, but turn the key in the opposite direction.
4. Remove the key from the door, get into your Ford, and start the engine. The system should be reset.

How to Reset the Anti-Theft System on Your Ford

It is likely that the battery needs to be replaced. Check the connections to make sure they are clean and secure. If the connections are good, then the battery may need to be replaced. Additionally, check the alternator and starter to make sure they are functioning properly. If they are not, they may need to be replaced or repaired.

Question edited for clarity. Question moved to model category. Key

• Insert the key into the driver's side door lock.
• Turn the key once, but not all the way to unlock the door. Leave the key in this position for 40-60 seconds. ...
• Do this again, but turn the key in the opposite direction.
• Remove the key from the door, get into your Ford, and start the engine. The system should be reset.

How to Reset the Anti-Theft System on Your Ford

https://www.auffenbergfordnorth.com > reset-ford-anti-th...

Diagrams in the link. https://www.google.com/search?q=1997+ford+expedition+brake+line+diagram ..

The censor is not seeing it is engaged or it isn't engaging

Rick is correct in his answer but the suspected spots are the oil cooler hoses from the radiator back to the oil filter adapter the pressure switch on the adapter and since you say both sides it should be the oil cooler lines good luck and powder up the lines and fittings and have someone else start the engine while your looking for the leak

there should be a tag on rear end to check rear end, there are 4 different seizes for that car. 16 is 3.73 ,17 is 3.31 ,19 3.55 pos track. and 19 3.55 limited slip.

if it isn't getting gas, possibly the fuel pump is defective.

Until you get the trouble codes read there's no way to know what's causing the fault. So not, there's no easy fix without the codes

You have to remove the parts to see where the leak is. Remove the manifold carefully to preserve the evidence. You can check the manifold mating surface with a straightedge. You may find the leak is actually in the head gasket. Make him show you the warpage before letting him sell you new parts. A metal part like the head can be resurfaced at a machine shop.

The surging usually comes from the IAC hunting to maintain a stable idle. usually your symtoms occur from a vacuum leak of some sort. plastic intakes are sometime found to be cracked from heat embrittlement. spray the top of the engine with brake clean when running. if the idle changes when spraying in a certain area you are locating the vacuum leak. the idle will change when the engine sucks in the brake cleaner.

Check the sensor ring on the column that's around the cylinder for a bad wire and check the receiver plug and antenna also check your key if it has a battery and the fuse for the pats system download the manual from ford owners. Com and go to roadside emergencies and your fuse box diagrams are in there and the fuse values and relay locations something is loose or corroded clean all associated with the pats system and write everything down that you did so things can be ruled out also check the column wire connections all the way down to the floor

Get your car to a transmission shop right away! You may have not damaged it beyond repair, but you will soon if you keep doing what you say you're doing to it.

Could be a leak in the system or a tear in one of the airbags (which is what I had). I had to have one air shock replaced.

turn it off and open window

you need the repair manual to fix the problem and this manual is available on the given link http://toolsnyou.com/ even you can drop your mail id they will send you the link in no time i had tried it allready

Looks like it sits on top of the heater housing left of the blower. You may be able to see it by removing the glove box. These things tend to strip their plastic gears. If you heard a lot of clicking before it failed, that is what happened.