1997 Ford Expedition "4wd fuse" Questions

...4wd nothing happens. I think there is a relay fuse as well but im not sure which one it is. Any ideas what could be causing this? You need to specify if it's the high or low 4WD, or both that's the ...

...vehicle in neutral and move switch to 4 low there is a clunk in the rear, the dash indicator for 4wd low comes on but there is no 4wd I checked all fuses to the transmission, shifting, 4wd and

my 4wd doesn't work, I think is the tranfer case Check the 4WD fuse first. Then if its good check for a disconnected vacuum hose. Those are very common problems on this trucks.

...fuse but now the 4x4 light is on on my dashbord and when i swick it two 4w it drive bad and truns left real slow some on help If the 4wd light is not flashing, then it is likely it stuck in 4wd ...

4WD fuse. The servo is locked up so I cant turn it to put it back in place on the transfer case since it only fits one way on the shaft and I moved it to 2WD and the servo is set at 4L. So my question

...fuse panel terminals . Common issues would be wipers not turning off or coming on without turning the switch , also the chime sometimes shorts and you hear it beeping while driving . What are your ...

I have a 97 expedition. 4wd did not work I have a 97 expedition. 4wd did not work sporadicaly. While not working, I tested for power at the transfer case to the engage the 4wd. Had no power going to ...

4wd is ingadge and wont disingadge The 4 wheel drive is engaged by a solenoid. It is run by 12 volts. I would check your fuse in the fuse panel, if the fuse is good, then it may be a relay or the ...

...4WD/AWD will not engage. No engaging noises or anything. It's as if the switch has disconnected itself from the rest of the system. I visually checked the following fuses according to the owners' ...

...fuse manual 5.4L 4WD the blinkers dont work The fuse for the flasher relay is located in the number 1 porition in the fuse box inside the vehicle ( see picture below). This should be in your owners ...