RoadPro Recent Questions, Troubleshooting Help & Support

The RoadPro Snack Master Deluxe typically includes a fuse in the plug to protect the device and your vehicle's electrical system. To access the fuse, follow these steps: 1. Unplug the Snack Master Deluxe from the 12-volt power source in your vehicle. 2. Inspect the plug. It usually has a cylindrical shape with a metal tip and a plastic body. 3. Look for a small cap or cover on the end of the plug. It may have a symbol indicating that it is removable. 4. Depending on the design of the plug, you may need to twist, unscrew, or gently pry off the cap or cover using a small tool or your fingers. 5. Once the cap or cover is removed, you should see the fuse inside. It will be a small, cylindrical component made of glass or plastic with metal ends. 6. Carefully remove the fuse by pulling it straight out from the plug. 7. Examine the fuse to see if it is blown. A blown fuse will have a broken filament or a visibly burned appearance. 8. If the fuse is blown, replace it with a new fuse of the same rating. Ensure that the replacement fuse matches the original specifications (ampere rating). 9. Once the new fuse is inserted, replace the cap or cover on the plug by aligning it properly and pressing it into place. 10. Plug the Snack Master Deluxe back into the 12-volt power source in your vehicle and test if it powers on. If replacing the fuse doesn't resolve the issue and the Snack Master Deluxe still doesn't power on, there may be a problem with the device itself. In such cases, it is recommended to contact RoadPro customer support or refer to the product manual for further troubleshooting steps or to inquire about warranty service or repairs.

There is a battery inside which may need to be replaced. To check, run the compressor (it runs off
the battery) - if the compressor dies quickly, then the battery has failed to charge and would
need to be replaced. You may want to check your Warranty Management software (or
shoebox) to see if your Starter/Air Compressor is still under warranty - if so, replace it.
Duralast products are carried exclusively by AutoZone, Inc.
The Duralast web site: www.duralastparts.com is useless - it only shows automotive parts,
and I cannot find the product at www.autozone.com, so it seems that AutoZone fails to support this
product with replacement batteries or other replacement parts (or even an online Users manual).

What the ****** fu***ng hell is wrong with you people always asking for is a manual and you give him all these fu****g spam links

not a car and we are not youtube. sorry, learn to search there or google + videos or RTM read the manual

How long before it max cold

I C this post is dated April, so maybe OP has solved problem. Most likely a stuck simmerstat (controller) which needs renewal.

I've uploaded a pdf copy for you.

I would guess the blue is POSITIVE, and goes to the tip of the lighter plug. However, get a voltmeter and check... Cheers.

eBay is your best choice for these items.

Did you ever find an answer to fix your problem? I have the same type of problem, and feel bad as I am an electronics tech with years of experience. I know that it must be a bad IC, transistor, capacitor, diode, resistor, etc. However, with all the components in the 2500, it is almost impossible to trace it out without a "Service Manual" or a schematic diagram. To blindly go in to just start 'tracing' a circuit and not knowing the wiring is not good to do. It is also almost an impossible task to simply start removing parts to test on the bench, and then reinstall. Even IF all test good, there can be a fault on the board itself. For an answer you can do as I am doing, and that is to call the company that is listed as the company involved with customer service. Customer support/contact, Truck and Automotive Accessories 1875 Zeager Road Elizabethtown, PA 17022 Sales & Customer Support Toll Free (866) 622-7979 [email protected]/roadpro If you would need to hire a tech to find the problem he would have to be a good friend to volunteer his work or the cost would be as high as buying a pure sine wave inverter. Take care, Dave. (DJnRF at yahoo)

I called the Service Call Center and they said that "FL" means the battery is fully charged, which is the way it is shipped from the manufacturer.

buy a new one