Princeton Digital Recent Questions, Troubleshooting Help & Support

Sounds like the trouble may be in trusting the auto-set defaults. If you haven't already, try setting the horizontal and vertical settings manually and see if it helps. Those adjustments should be easy to find, and if that will solve the issue, it will be a very simple fix. I hope this helps. -Steve

Try here:

http://www.driverguide.com

it sounds like the cable in the back is loose make sure it is pushed in all the way and tight

if it's new then get it replaced...
else u need to get it fixed from a tech shop....

Check the Inverter card Connector which goes to pannel,Next Panel to AD card signal Cabble,..

Tv repair shops and computer repair outlets usually have them in stock.

Go to a Computer Store or TV repair shop for a replacement cord.

That unit uses a power supply 12v 4-5 amp such as this one: http://www.ccl-la.com/catalog/product_info.php?products_id=48

Make sure the video card driver is as up to date as possible. If 7 is not available for it, an earlier Vista or XP usually work, but not always- if you load the same bit type- ie, 32 bit versions for 32 bit 7 and 64 bit versions for 64 bit 7. Eventide took over that part of Princeton Digital's product line and have nothing listed in their support areas.

If this is a new unit all what is needed is to check the first page in the manual for the list of acessories that comes along and if this cord is mentioned you must contact the dealer. If not this is a general type and so must not be a fault to get them in the general market- any spares shop.

Bad caps, transistors, transformers. Look for bad caps with bulging top or bottom seal first.
See my pictures here:
http://s807.photobucket.com/albums/yy352/budm/PRINCETON/Princeton%20VL1918W/

More likely to be bad caps.

Basic LCD monitor and TV troubleshooting guide: http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide http://www.fixya.com/support/r7406380-tv_training_manuals Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Parts: www.shopjimmy.com Parts: http://interliquidparts.com/

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

NO driver will make a monitor do what you want, that is a function of the actual VIDEO card that is what makes a monitor display the high resolutions, NOT the monitor itself, a monitor doesn't really need a driver as such to work at any resolutions. So try a Video card driver upgrade this may help?