La Crosse Home - Page 2 - Recent Questions, Troubleshooting & Support

Is the picture the type of clock your referring to? If so you cant set the time zone on that type of clock. You can change the time though.

I'm not totally sure what you mean by "reset the time" because the unit normally sets the time automatically from the WWVB radio time signal. If you want to do it manually, this is what the Instruction Manual (PDF format) says:MANUAL TIME SETTINGIn case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance, etc.), the time can be manually set. The clock will then work as a normal Quartz clock.

1. The hour digits will start flashing in the upper LCD.
2. Select the desired hours by pressing and releasing the + key.
3. Press and release the SET key to advance to the minutes setting.
4. Now the minute digits will start flashing.
5. Select the desired minutes by pressing and releasing the + key. If the + key is held, the unitswill increase by 5.
6. Press and release the SET key to confirm the Time setting and continue to the Year setting.

these really aren't atomic clocks and are set at the factory. It receives, it's LF signal out of Colorado and should correct itself. If not contact the manufacturer.

I think we're not talking about a WT-3101. What model is YOUR clock?

This site lists several including some desk models on two pages and each has unique downloadable instructions.

http://www.klockit.com/depts/AtomicClocks/dept-52.html

Hello! Send the model # and I'll set your clock...

Guru...........saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

You can get the info you need here, they should be able to help you identify your product which is not listed under that number.

Hi Follow this link for a copy of the clock instructions http://www.precisiontimekeepingshop.com/WebRoot/Store3/Shops/es119696_es124040752439/4A01/ADE9/E32C/D6DB/8872/50ED/8971/B0A9/PREC0007_0020_Instructions_0020_copy.pdf