Konica Minolta Cameras - Recent Questions, Troubleshooting & Support

Reload the Camera Software and Picasso. https://www.google.com/search?q=konica+minolta+z6+software+free+download ..

Page 117 says it has to be done at a Minolta Service Centre. https://upload.cyfrowe.pl/cyfrowe/instrukcje/aparaty/minolta/minolta_z2_eng.pdf https://www.google.com/search?q=konica+minolta+dimage+z2+replace+memory+battery ..

The backup cell is rechargeable and when the main battery is reinserted and charged, it will charge the backup cell after a while.

This specification is carefully determined to balance between possible time lapse to create smooth motion and actual data processing ability of the hardware.

If your Konica Minolta Dimage Z6 camera is working fine but is not being recognized by Windows 11, there are a few things you can try to troubleshoot the issue:

1. Check the USB cable: Make sure that the USB cable you are using is properly connected to both the camera and the computer. Try using a different USB cable to see if that resolves the issue.
2. Check the USB port: Try connecting the camera to a different USB port on your computer to see if the port is the issue. Some USB ports may not have enough power to detect the camera.
3. Install the camera driver: If the camera did not come with a driver disc, try downloading and installing the driver from the manufacturer's website. Make sure to download the correct driver for your camera model and operating system.
4. Restart the computer: Sometimes, restarting the computer can help to resolve issues with USB devices not being recognized.
5. Try a different computer: If the above steps do not work, try connecting the camera to a different computer to see if the issue is with the camera or the computer.

If none of these steps resolve the issue, it is possible that there may be a hardware problem with the camera. In that case, it may be necessary to contact the manufacturer or a qualified technician for further assistance.

Its possible you might have to reformat the card in your Minolta Maxxum D7 to get the camera to recognize the card.

Hello,
Try to take picture without memory card and observe that still camera goes to Off?

Do you going to sell? [email protected]

A circuit or wire short will need to be diagnosed with a meter or send out for repair

You may use any size SD card. Bear in mind that SD cards max out at 2GB. Larger cards are actually SDHC cards and won't work in the Z1.

when it switches to B&W, it's showing you that what you're framing is in a low light condition. perfectly normal behavior as described in the manual

I found a Minolta site in Germany where you can download drivers for win 98. For the newer Windows (2000, XP, Vista, 7 and 8) the drivers are already in Windows. Second link is for the transfer software. Link to drivers for Minolta in Win 98link to Konica Minolta transfer software

eBay has number of replacement choices...www.ebay.com

I agree with you, To fix the system error you need to follow some simple and quick steps which the author shared here, But if you face still the same then you can contact Gmail support for help, here you can find all kind of solution which we all want to know. Home Emails Support

Consider the following: Minolta closed their camera division in 2004, and sold the operation to Sony. That's also why the later Minolta lenses are compatible with Sony DSLRs (Minolta AF mount).
However, this meant that Minolta cameras were also automatically rendered obsolete, with no new spares being manufactured / supplied. (I know, I still own some Minolta cameras and have been down this road)
Now, I'm sure you can see how slim the chances are of getting any spares for the camera in question, especially a humble Point and Shoot.

It's time to aquire something newer (imho).

You're not trying to connect a high speed USB device into a low speed bus, are you?

Hello.
If there's no warranty on the LCD, you have to get it repaired.