Jensen's Popular Questions, Answers, Tips & Manuals

your TV cannot boot and repeats the attempt.
your main board is bad.

Try audiovox.com.

The serial number would be on the bottom or at the very back.

This is one video lock condition that you need to bypassed. In THIS LINK can find the solution: Jensen-Video-Bypass-Lockout-VM9214-VM9414-VM9324

I heard this same problem, if it plays when its parked then it has a little safety feature that involves a wire, maybe pink in color for your headunit that will only allow it to play when parked. Now if you splice it into the red or yellow, I'd choose red since its not constant, it will play movies anytime.

If it won't play them even when parked then it is not hooked up to a wire or its hooked up to ground and therefor should be hooked to a positive wire, red or yellow. If you didn't put it in yourself then you can take it to an audio shop, maybe check in phonebook for someone local.

But the easy way would be to use a bypass code since there is ojne for your hu. I copy these instructions from ecoustics.com The parking brake bypass procedure is as follows:
1: Go into AM/FM mode
2: Hit "setup" on the remote control
3: Enter 543210 on the remote, listening for the beep for each number entered
4: A new menu will appear. Touch the button that has the hammer/screwdriver on it in the upper left-hand part of the screen.
5: Select Brake bypass to "ON" and hit the "X" near the bottom of the screen.
6: Use the unit wisely and above all safely. A ticket is one thing, causing a fatal accident due to negligence is another.

I don't know if it really works but you could try it, if not use the wiring method above: ecoustics.com/bbs/4/278797.

Hope helps.

Hi,

You can download and print the instruction manual for the jensen vm9312 in PDF format by clicking this link.

Adobe PDF Reader is required to view this manual. Download Adobe Reader

Hope this helps. Thanks for using FixYa.

My Guess is it Probab;y a bad sensor inside, unfortunately you may be better off purchasing a new deck than payoing for it to be repaired. But if you still have warranty time left call there customer service line and find out what the repair will cost.

you can try audiovox.com. audiovox owns jensen.

yes... the park wire needs to be grounded in order to play a DVD

try entering all zero's as password ..

http://mobile.jensen.com/findmanual/?findManual=VM9312&x=13&y=18

try going to audiovox.com. audiovox now owns jensen. you should be able to email them or get a phone number on the website.

Sounds like the ribbon cable inside the unit to the screen has become detached or loosened. May have to pull unit apart carefully to re-attach it. If you go down this path be very gentle as they have a habit of ripping...

what i did was put the pink cable(parking brake) and connect it to ground(black) of the stereo harness and then both of them hook it up to the black cable of the car which is ground or negative.

the unit has programable turn on volume....go into the menu and adjust the setting so when u turn it on its volume will be at like 10 or so

sounds like you may have a bad (shorted) switch.

Take off faceplate and press reset, or disconnect car battery and reconnect.

well connect it to the rca in the back of the jensen,or write back to me aso i can help u out more narrowly.

What u need to do is install a on/off switch that runs from the (black negative wire) to the (pink park break wire). This will allow to reset that annoying blue screen. Turn the switch on wait 5 seconds & turn the switch off repeat this step 3 to 5 times & that will do the trick. It really works I did it to mine LOL!!!!!!!! [email protected]

Most likely this means the dvd laser is bad internally. dvd needs a much finer laser to read the disc as it contains more data. If the unit is under warranty have it repaired as such otherwise most likely it won't be worth the cost of repair and you should use it or replace it.
Thank you,
Lee

the iphone4 is a brand new peice of equipment and many older bits of technology aren't compatible with it.