My radio is installed but the sound only works
It shows up in the post on my PC.... how about this?
But it sounds as if we are on the same page - so far - anyways.
Next is to verify the subject of this post is - in fact - your radio.
You have listed the Jensen VM9312.
Is this correct??
I installed a new head unit ,amp,speakers,10
Take the car to Pepboys and have the codes read, they will tell you what your problem is and get you the parts to fix it yourself or they will do it for you, don't keep fixing untill you find out what it's not. Most likely it's your alternator or bad ground.
Jensen vm 9312 region code
You can get into the master system by using your remote.
1.Make sure your Jenser VM9312 is on, and select
AM/FM as your source.
2.On
your remote, press the Setup button, located on the lower right of the
remote, you should hear a beep from your VM9312 when you press the button.
3.Now,
making sure you hear a beep after every key press, press, 543210.
NB:If you
did this correctly, a new menu screen will pop up.
4.On the display, press the hammer and screwdriver
icon, located on the left hand side of the screen.
NB: Here you can bypass the break and regions etc.
When done Press
the X at the lower left of the screen and enjoy.
Cannot watch ipod video on tv even using the correct apple cable
I solved my problem with this issue. It wasn't the radio in my case. Don't know if this will help anyone else but I had to turn "ON" the TV output on my ipod. This is done by going to Videos - Settings - TV OUT. Then click center button to turn it to "ON".
Ipod video problems
I have the Jensen head unit. I found out a while ago that the 6th Gen Ipod Classic does not send video through the multi-pin connection. Only out of the headphone/A/V out. This is the reason it does not work via the JLink cable into the Jensen VM9312
Vm9312 in dash will not play video
Go to your radio tuner screen and go to your set up page then use your remote and press 5,4,3,2,1,0 and hidden menu will pop up then you will have to press the tool looking button on the left side of the screen and it will give you an option to it off so you dont have to hook up the pink wire.
Captions for Jensen VM9312
go under your setup screen and press the language tab and you will see DVD subtitles then is will give you options to turn it off.
Jensens VM 9312 car DVD player problem
Just go to the set up menu ( Your screen should say setup at the upper center of your screen ) Then press 5, 4, 3, 2, 1, 0 with your remote control and a second menu will apear, on your left side press the second option and select parking bypass to on.
Not finding what you are looking for?